Shocker PASS

Bodacious

Bodacious

Comp Diesel Sponsor
Hello all,

As some of you may remember, we dang near lost our son in a run away.

Ram50 - Page 33 - Competition Diesel.Com - Bringing The BEST Together

Post 660.

Since then, a fello member by the screen name of Nootch hooked me up with a company in Canada called Head Wind Solutions. Head Wind Solutions manufactures the "Shocker PASS". PASS standing for Positive Air Shut off System.

Check them out.

Headwind Solutions

I purchased one of their 4" valves and immediately went to modifying it for racing. It was a bit heavy, did not have V-band flanges, and was not full bore.

I later had a need for a second 'Shocker PASS' and decided to contact Headwind Solutions to see if they would be interested in cutting me a couple prototypes.

They did and I now have the sole marketing rights on the SRS version of the 'Shocker Pass'.

Coaltrain is in the process of installing one right now. We are having some issues. Keep watch on Johnnies build thread.

Rebirth of Monster Mudder - Page 63 - Competition Diesel.Com - Bringing The BEST Together
 
We have quite a few companies that build positive air shutoff's up here for oilfield use. My personal favourites are made by Mighty Titan. They have sizes from 2" to 6" and are full flow through with a butterfly valve.


Sent from my iPhone using Tapatalk
 
I didn't really have a need to look around any when I was buying.

Has anyone had any luck finding mild steel v-band flanges that will mate up to the aluminum vibrant v-bands??
 
Bodacious said:
I didn't really have a need to look around any when I was buying.

Has anyone had any luck finding mild steel v-band flanges that will mate up to the aluminum vibrant v-bands??
Click to expand...

We are now making a flange very similar to vibrants V-bands flanges. This flange is only offered in mild steel. This flange will mate to Vibrant's aluminum and stainless flanges. If I get enough interest, I'd like to get 100 spun out and sold to keep the cost down.

Thanks,

Arch Stalnaker
 
4" Competition Shocker Pass

Available as cable pull or 12 volt solenoid activated.

sp9.jpg


sp10.jpg
 
OK Folks, I know some of you have been waiting on pricing. I am doing my absolute best to keep things like this that are a safety must, as cheap as possible.

Again, you will not find a better positive safety shutoff valve designed for diesel motorsports!!

How does $892.00 on the 4" cable pull with free shipping sound?
 
If you plan on tripping the valve on every pass, I would recommend a BOV.

If you have it there for just when you need it, without a BOV, turbo damage is a guarantee.

Of course, any positive pressure shutoff valve will require the BOV.

Other non-safety related advantages exist that may convince you to run this type of valve. Packaging is a major advantage as these valves are much smaller in length than any competitor and will help to free up some underhood room. This shutoff valve is 100% leak proof to 300psi. This means your intake system is also 100% sealed. Nothing makes me cringe more than to go to a pull and see a multi-thousand dollar engine sucking in air with NO air cleaner.

Regardless, don't be a dumb redneck like myself and wait till it is to late to install an air kill. Whether it be mine or a competitors valve, these are a safety must in any type of diesel motorsport.
 
Bodacious said:
OK Folks, I know some of you have been waiting on pricing. I am doing my absolute best to keep things like this that are a safety must, as cheap as possible.

Again, you will not find a better positive safety shutoff valve designed for diesel motorsports!!

How does $892.00 on the 4" cable pull with free shipping sound?
Click to expand...

We also have the valves available in 3.5" full bore. The pricing is the same as the 4" valve $892.00 plus shipping for the cable pull.

For those interested in tripping the valve electronically or possibly even servo driving the valve for an awesome progressive/compound set up, please see the Headwind Solutions website. 12 and 24 volt solenoids are available.
 
Last edited:
I'm such an idiot sometimes, my phone number is 304-406-4583. My wife and I are working on my website right now so if you want to order a valve, just give me a call or text.

I'm moving up in the world and my wife is getting very scared... I now have a credit card machine!!!!:hehe:
 
Bumping for a 'today's post spot'

I need to get some of these moving. What am I doing wrong CompD?

I have an unbeatable product at a very fair price?
 
I will offer a 10% discount for the first ten sold.

Again, the best I can do right now is take your CC info over the phone. Please give me a call/text at 304-406-4583.

Thanks for the opportunity CompD!!!
 
You must log in or register to reply here.
Back
Top