jones95runner
New member
So this is my first go around for running a external gate. This will be with a s488 96 1.32. Motor has made in the 1500hp range with a single and fuel just playing with some new stuff. I have a 50mm high pressure turbo smart Gate coming to go with charger. I think the factory settings on waste gate is 35psi. I have boost and drive gauges.
Im more wondering do I need to go on and plumb air into the waste gate side and add a little more to the spring or leave it like it is and see where im at and go from there.
Also I'm assuming 1:1 would be ideal. So I think thats what I'm shooting for.
Im more wondering do I need to go on and plumb air into the waste gate side and add a little more to the spring or leave it like it is and see where im at and go from there.
Also I'm assuming 1:1 would be ideal. So I think thats what I'm shooting for.