Burningtire
New member
Pushing back.
2.5 suspension help
- Thread starter 99GreenCummins
- Start date
ComnRailPwr
New member
Pulling forward is a bad thing, caused immediate hop when I did it a few years back.
Shawdrainage
Shaw
Pushing back
99GreenCummins
That guy....
I thought so, figured I'd make sure though.
Got Milk?
One hook at a time
Don't weld the large hole that is shown in the pic. That hole is for a case spreader so you can set proper bearing preload when changing gears
Lincoln_Diesel
That one guy
Can people post where and how you mounted up your weight brackets? I mounted mine to the front cross member by myself real fast before a pull and long story short it got bent from the weight... I just wanna know a better way to weld it in and all that. The traction bars follow the line of the drive shaft coming to about the ex cab door. We are using a regular reese hitch. Did a solid drive shaft also. We will take off the leveling kit. Then the only suspension work I have is we took some box tubing and flat plate and welded them from frame to the bump stop leaving 1" of travel thinking that's what we were required..
1pieceatatime.
Comp Diesel Sponsor
But that picture is out of a magazine, its gotta be legit :hehe: