Bigger Injectors now Horrible throttle hang
Well I recently installed a set of 50 percent over injectors in my half ton and now I have an issue if you are on the brakes spooling up and let off it continues to fuel at around 1300-1500 rpm for a few seconds then comes down to idle. Note, it DOES NOT have this issue whatsoever on a stock tune. If I select any of my tunes it does it. I tapered off rail pressure on the end and it still does it. Data log is showing it's commanding around 11k psi of rail press and it's jumpy also between 700-1300us off throttle. Any ideas on what to change? I'm stumped.
__________________
15 Mega Cab Dually
03 RCSB 1500 12 valve 215 pump, built 47re, 5x18s, 4k gsk, sxe369, Fass 240, 7mm delivery valves, 11.71
08 RCSB 1500 06 CR built 48re, Compounds, 200% over, 12mm, Billet rod motor, etc..
2009 CCSB 6.7L
|