Turbo back dual stack quote

yamaman

New member
Hey guys, I was wondering if I could get a quote on a turbo back dual stack kit for my 2006 F-350 CC SB 6.0L PSD. I would like the kit with the 3.5" downpipe to 4" to 5" Tee in bed. Thanks.

P.S. Don't know if you have black stacks but if you do can you fire me off a price on 6" and 7" x 36" mitre cut with the 5" inlet to fit the system. Thanks
 
Hey guys, I was wondering if I could get a quote on a turbo back dual stack kit for my 2006 F-350 CC SB 6.0L PSD. I would like the kit with the 3.5" downpipe to 4" to 5" Tee in bed. Thanks.

P.S. Don't know if you have black stacks but if you do can you fire me off a price on 6" and 7" x 36" mitre cut with the 5" inlet to fit the system. Thanks

I can give you part numbers and then some dealer contact names, we are just the manufacturer, and do not sell direct. Depending on what size stacks you go with, here are the kit numbers:

PS-6.0-6SK (use with 6" stacks)
PS-6.0-7SK (use with 7" stacks)

As for the stacks, we do not build black stacks. You can get them Chrome or RAW. The Raw stacks you can have coated anyway, and any color you want. We did think about building black stacks, but the durability just wasn't there. Most people use their trucks everyday, and that is hard on a black finish. I suggest if you want black stacks, to get the raw stacks, and paint them your self with black high-temp paint (used on outdoor cooking grills) this way if it gets scratched or chipped, you can just hit with the rattle can.

Part numbers for the stacks are:

SP6-36SBC (chrome 6" x 36" reduced to 5" od miter cut stack)
SP6-36SB (raw 6" x 36" reduced to 5" od miter cut stack)
SP7-36SBC-5 (chrome 7" x 36" reduced to 5" od. miter cut stack)
SP7-36SB-5 (raw 7" x 36" reduced to 5" od. miter cut stack)

If you look in my dealers thread, you can see a list of dealers there that sponsor this site, or you can PM me, and I'll look to see who I have near you.
 
Back
Top