Advertisement
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Home Who's Online Today's Posts HP Calculator CompD Gift Shop Mark Forums Read
Go Back   Competition Diesel.Com - Bringing The BEST Together > The Starting Line > Competition Vehicle Build Tech > Turbo/Super Charger Tech
Register Members List Timeslips EFI Live Library Invite Your Friends FAQ Calendar Mark Forums Read

Closed Thread
 
Thread Tools
Old 07-25-2012, 03:52 PM   #21
AHall
 
AHall's Avatar

Name: AHall
Title: Hobbyist
Status: Not Here
Join Date: Apr 2007
Location: Western Slope, CO
Member`s Gallery
Posts: 4,603
Noted thanks.
__________________
-Adam

Prostreet F-100 Build Thread

http://www.competitiondiesel.com/for...112541&page=24
 
Old 07-25-2012, 03:59 PM   #22
Headcase98002
 
Headcase98002's Avatar

Name: Headcase98002
Title: Too Much Time
Status: Not Here
Join Date: Sep 2010
Location: Edinburgh, Indiana
Member`s Gallery
Posts: 1,631
The Hx40 does not come in a 12cm or 14cm housings. They have 16,17,18,19 and 21cm housings with T3 T4 mixture.

The HT3B can come in a 32cm housing as well.

The HX 35 never came with a 60cm comp wheel.
__________________
1998 QCDRW 4x4 - p24v, 4k's, 024's, SAC 6x.013's, s363/68/.83 - HT4B, BD Intercooler, ATS T4 Manifold, 6" Exhaust, FirePunk Trans, Hamilton Springs & Push Rods, ISS Pro Gauges, exc.....

Last edited by Headcase98002; 07-25-2012 at 04:02 PM.
 
Old 07-25-2012, 04:13 PM   #23
AHall
 
AHall's Avatar

Name: AHall
Title: Hobbyist
Status: Not Here
Join Date: Apr 2007
Location: Western Slope, CO
Member`s Gallery
Posts: 4,603
Added because of the 35/40 hybrid commonly used and compatibility. Same goes with a few garretts. Stuff you don't find on the website.
__________________
-Adam

Prostreet F-100 Build Thread

http://www.competitiondiesel.com/for...112541&page=24
 
Old 07-25-2012, 04:23 PM   #24
AHall
 
AHall's Avatar

Name: AHall
Title: Hobbyist
Status: Not Here
Join Date: Apr 2007
Location: Western Slope, CO
Member`s Gallery
Posts: 4,603
Also could you be more specific on the hx40 housings.
__________________
-Adam

Prostreet F-100 Build Thread

http://www.competitiondiesel.com/for...112541&page=24
 
Old 07-25-2012, 04:38 PM   #25
Headcase98002
 
Headcase98002's Avatar

Name: Headcase98002
Title: Too Much Time
Status: Not Here
Join Date: Sep 2010
Location: Edinburgh, Indiana
Member`s Gallery
Posts: 1,631
As far as I can tell they are all divided. The T4 housings include 16cm, 17cm, 18cm, 19cm and 21. The 16cm and 18cm housing also come in a T3 version.
__________________
1998 QCDRW 4x4 - p24v, 4k's, 024's, SAC 6x.013's, s363/68/.83 - HT4B, BD Intercooler, ATS T4 Manifold, 6" Exhaust, FirePunk Trans, Hamilton Springs & Push Rods, ISS Pro Gauges, exc.....
 
Old 07-25-2012, 04:40 PM   #26
Headcase98002
 
Headcase98002's Avatar

Name: Headcase98002
Title: Too Much Time
Status: Not Here
Join Date: Sep 2010
Location: Edinburgh, Indiana
Member`s Gallery
Posts: 1,631
Also the Hx40 60/86 comp wheel comes in a 8-blade, 7-blade and 6-blade version. The Hx35 56mm wheel can come in the 8-blade and 7-blade version as well.
__________________
1998 QCDRW 4x4 - p24v, 4k's, 024's, SAC 6x.013's, s363/68/.83 - HT4B, BD Intercooler, ATS T4 Manifold, 6" Exhaust, FirePunk Trans, Hamilton Springs & Push Rods, ISS Pro Gauges, exc.....
 
Old 07-25-2012, 05:23 PM   #27
97rada
 
97rada's Avatar

Name: 97rada
Title: Too Much Time
Status: Not Here
Join Date: Feb 2008
Member`s Gallery
Posts: 5,410
Watching
__________________
Austin
tow truck- 14-3500 with tuning
toy truck -94 rclb auto- 5.2x with a lot left. Shooting for 4s

Any intelligent fool can make things bigger and more complex...it takes a touch of genius- and alot of courage to move in the opposite direction.
 
Old 07-25-2012, 06:11 PM   #28
AH64ID
 
AH64ID's Avatar

Name: AH64ID
Title: Too Much Time
Status: Not Here
Join Date: Dec 2008
Member`s Gallery
Posts: 883
HE351CW (non-VGT) has a 68x60mm turbine wheel.

HE351VE (VGT) has a 70x60mm turbine wheel

They both use the same 60x85mm 7 blade comp wheel, same one as the 7 blade HX40 ~65 lb/min, depending on where you read it.
__________________
2018 Ram 3500 CC LB Laramie - AISIN - Auto-Level - 5er Prep - RVK3600 - Titan Tank

 
Old 07-26-2012, 12:11 AM   #29
Tate
 
Tate's Avatar

Name: Tate
Title: What?
Status: Not Here
Join Date: Nov 2007
Location: Airdrie, Alberta
Member`s Gallery
Posts: 3,419
Quote:
Originally Posted by AHall View Post
Was just going to find the time to hand calculate it. Wasn't aware of them being different. All the same that i've seen.
The inducer size is the same between them, but the BB turbos have a 78 trim, the JB turbos are an 84 trim.
__________________
'98 3500 2wd, 24v, 5 spd, p-pumped
'98 2500 4wd, 12v, 6 spd, VP'd
'02 VW Jetta, 5 spd.

My p-pump conversion pics
 
Old 07-26-2012, 12:56 AM   #30
AHall
 
AHall's Avatar

Name: AHall
Title: Hobbyist
Status: Not Here
Join Date: Apr 2007
Location: Western Slope, CO
Member`s Gallery
Posts: 4,603
Good call
__________________
-Adam

Prostreet F-100 Build Thread

http://www.competitiondiesel.com/for...112541&page=24
 
Old 07-26-2012, 06:36 AM   #31
Peterson
 
Peterson's Avatar

Name: Peterson
Title: Too Much Time
Status: Not Here
Join Date: Feb 2009
Location: Westboro, WI
Member`s Gallery
Posts: 1,015
Quote:
Originally Posted by AH64ID View Post
HE351CW (non-VGT) has a 68x60mm turbine wheel.

HE351VE (VGT) has a 70x60mm turbine wheel

They both use the same 60x85mm 7 blade comp wheel, same one as the 7 blade HX40 ~65 lb/min, depending on where you read it.


He351cw has a 68x58mm turbine. Not a 60mm exducer.

The turbine on the Hy35,he341 and he351 are all the same.
__________________
Tyler P.
Just a old 12 valve
Super HY351, and a Bigstick!
Allis Chalmers D17 Puller with AC 3500 MKII
 
Old 07-26-2012, 07:48 AM   #32
Shambo
 
Shambo's Avatar

Name: Shambo
Title: Diesel Idiot
Status: Not Here
Join Date: Dec 2006
Location: Deltona, FL
Member`s Gallery
Posts: 1,413
The HT3B also has a 29 housing!
__________________
RIP 2003 3500 CR
1997 12V 2500 14.207 1/4 ET @94 MPH.
THANKS DIESEL SPECIALISTS, AIRAID, FTI, PUREFLOW TECH, and COR FAB
 
Old 07-26-2012, 07:56 AM   #33
05chevy
 
05chevy's Avatar

Name: 05chevy
Title: gear head
Status: Not Here
Join Date: Jul 2010
Location: maryland
Member`s Gallery
Posts: 635
My ht3b has a 22 housing on it
__________________
05 lly s475, 40% nozzles, stock cp3 11.69@115
685hp/1100ftlb
 
Old 07-26-2012, 09:38 AM   #34
AH64ID
 
AH64ID's Avatar

Name: AH64ID
Title: Too Much Time
Status: Not Here
Join Date: Dec 2008
Member`s Gallery
Posts: 883
Quote:
Originally Posted by 17cumminsboy View Post
He351cw has a 68x58mm turbine. Not a 60mm exducer.

The turbine on the Hy35,he341 and he351 are all the same.
Not according to the specs I have seen, and from phone calls from Holset. I never took calipers to them, but the HE351 has been called a 60/60/9 in everything I have seen. The HE341 is smaller and your post is the first I have seen where they were called the same.

Not saying I have it wrong, just a lot of info stating it's a 68x60.
__________________
2018 Ram 3500 CC LB Laramie - AISIN - Auto-Level - 5er Prep - RVK3600 - Titan Tank


Last edited by AH64ID; 07-26-2012 at 09:39 AM.
 
Old 07-26-2012, 05:53 PM   #35
Peterson
 
Peterson's Avatar

Name: Peterson
Title: Too Much Time
Status: Not Here
Join Date: Feb 2009
Location: Westboro, WI
Member`s Gallery
Posts: 1,015
i have 2 of them and they are both 58mm. If people really want to, i will got take a pic with the caliper on one. The only thing smaller on the he341 and hy35 is the Compressor wheel.
__________________
Tyler P.
Just a old 12 valve
Super HY351, and a Bigstick!
Allis Chalmers D17 Puller with AC 3500 MKII
 
Old 07-26-2012, 05:55 PM   #36
Peterson
 
Peterson's Avatar

Name: Peterson
Title: Too Much Time
Status: Not Here
Join Date: Feb 2009
Location: Westboro, WI
Member`s Gallery
Posts: 1,015
Hell i got a he351 in a hy35 exhaust housing on my tractor.
__________________
Tyler P.
Just a old 12 valve
Super HY351, and a Bigstick!
Allis Chalmers D17 Puller with AC 3500 MKII
 
Old 07-26-2012, 06:29 PM   #37
Bullrack
 
Bullrack's Avatar

Name: Bullrack
Title: Too Much Time
Status: Not Here
Join Date: Sep 2006
Location: Alexandria, La.-Tenaha, Tx.
Member`s Gallery
Posts: 1,224
HT3b's also have a 27cm housing. From what I've seen, there are HT3b's from Holset and BW/Schwitzer. I think the Holset's have the odd numbered ext. housings and the BW's have the even numbered housings. Seems like the Holset's are divided and the BW's are not divided.

The flange on any HT3b is not a T6.
__________________
'03 F350 CrewCab Lariat 4X4 DRW 12V Cummins, P&P head with 60# valvesprings, Colt cam, 4K GSK, 20* Timing, GDS 60mm HX35/HT3b Twins, JGS Ext. Gate, Fuelab, ZF6spd with Valair Ceramic/Kevlar, manual hubs, 3.73's, 5.5" lift w/285 Dayton Timberlines, 2" Wheel Spacers.
 
Old 07-26-2012, 06:44 PM   #38
Headcase98002
 
Headcase98002's Avatar

Name: Headcase98002
Title: Too Much Time
Status: Not Here
Join Date: Sep 2010
Location: Edinburgh, Indiana
Member`s Gallery
Posts: 1,631
My Holset is a 26cm non-divided housing.
__________________
1998 QCDRW 4x4 - p24v, 4k's, 024's, SAC 6x.013's, s363/68/.83 - HT4B, BD Intercooler, ATS T4 Manifold, 6" Exhaust, FirePunk Trans, Hamilton Springs & Push Rods, ISS Pro Gauges, exc.....
 
Old 07-26-2012, 08:35 PM   #39
AH64ID
 
AH64ID's Avatar

Name: AH64ID
Title: Too Much Time
Status: Not Here
Join Date: Dec 2008
Member`s Gallery
Posts: 883
Quote:
Originally Posted by 17cumminsboy View Post
i have 2 of them and they are both 58mm. If people really want to, i will got take a pic with the caliper on one. The only thing smaller on the he341 and hy35 is the Compressor wheel.
Interesting. I also noticed that BAE said the same thing.

Weird that I got 68x60 from holset, but looking at my notes they also said 60x82 on the comp wheel and I know that is wrong!

So 58mm it is, another reason I am super happy I ditched it. It's nice having a turbo that 99.8% of the time has more boost than drive pressure, instead of the opposite.
__________________
2018 Ram 3500 CC LB Laramie - AISIN - Auto-Level - 5er Prep - RVK3600 - Titan Tank

 
Old 07-26-2012, 08:41 PM   #40
Bullrack
 
Bullrack's Avatar

Name: Bullrack
Title: Too Much Time
Status: Not Here
Join Date: Sep 2006
Location: Alexandria, La.-Tenaha, Tx.
Member`s Gallery
Posts: 1,224
Quote:
Originally Posted by Headcase98002 View Post
My Holset is a 26cm non-divided housing.
Is that 26cm housing stamped Holset?
__________________
'03 F350 CrewCab Lariat 4X4 DRW 12V Cummins, P&P head with 60# valvesprings, Colt cam, 4K GSK, 20* Timing, GDS 60mm HX35/HT3b Twins, JGS Ext. Gate, Fuelab, ZF6spd with Valair Ceramic/Kevlar, manual hubs, 3.73's, 5.5" lift w/285 Dayton Timberlines, 2" Wheel Spacers.
 
Closed Thread

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:04 PM.

 


Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2006 - 2024, CompetitionDiesel.com
all information found on this site is property of www.competitiondiesel.com