800hp 24v setups

M

mathews8pt

New member
My goal is to break 800 this year and while I wait for free time to finish some little stuff on the truck, I was wondering what kind of setups you guys are running.

I made around 725 2 years ago with a cast wheel s468 and the same fueling setup. Now I have a set of 64/71/14 and 80/96/1.32 compounds. Fueling is a 180 pump(racked on the truck), 5ks, comp cuts, and 6x13 injectors. I'm wondering if I will need more injector to be over 800 this year? Thoughts?

P-pumped 24v setups only please.

Edit: truck has a older maxspool cam and I ported a good bit on the bowls and exhaust side of the head also.

Sent from my iPhone using Tapatalk
 
Last edited:
That's impressive with 7x10s! You were running 62/80 compounds or something similar weren't you?


Sent from my iPhone using Tapatalk
 
The 7x.010's were good old Mach 7's. and it was an SPS62 and HT4C. essentially and 62 over an 83.
 
So I should have enough injector, that's good. My pump probably could use sent out and balanced better then it is now. But I will probably see what it will do before spending the $350 or whatever it is for Seth to do it these days.


Sent from my iPhone using Tapatalk
 
mathews8pt said:
So I should have enough injector, that's good. My pump probably could use sent out and balanced better then it is now. But I will probably see what it will do before spending the $350 or whatever it is for Seth to do it these days.


Sent from my iPhone using Tapatalk
Click to expand...
Who's dvs?

I think you should have 800.
 
really interested in this as well. currently have 7x10s doing a 63/80 compound set up. 750+hp is the goal. is it necessary to go to a 6 x13 or 6 x15 6x16 to have that goal.(comes down to whats for sale) still have stock dvs in the bump so I'm thinking 7mm comp cuts. only other mods are 4ks to the bump just curios new to all of this any advice would help
 
I made a little over 800hp on fuel and 1002hp with a little spray on a 215 pump from Seth with 4ks (needs 5ks) 6x18 dual feeds, s475/83/1.0, on an air dog that wouldn't give me nearly the fuel it needed and zero pump tuning. With more fuel and rpm it definately has more to go. Good luck reaching your goal. Good choice going with Seth.
 
oldblue116 said:
I made a little over 800hp on fuel and 1002hp with a little spray on a 215 pump from Seth with 4ks (needs 5ks) 6x18 dual feeds, s475/83/1.0, on an air dog that wouldn't give me nearly the fuel it needed and zero pump tuning. With more fuel and rpm it definately has more to go. Good luck reaching your goal. Good choice going with Seth.
Click to expand...

Where was your timing at when you made those numbers?

Similar setup over here.

13mm with high flow DVs, quickrate cam, 5ks and all.

Weston's 6X.018s

A1000 LP and a billet S475/87/.90

Looking for 850+ on fuel. Very optimistic seeing your results. I'll post mine here when it's up and going.
 
Last edited:
24vboost said:
Where was your timing at when you made those numbers?

Similar setup over here.

13mm with high flow DVs, quickrate cam, 5ks and all.

Weston's 6X.018s

A1000 LP and a billet S475/87/.90

Looking for 850+ on fuel. Very optimistic seeing your results. I'll post mine here when it's up and going.
Click to expand...
I can't recall off the top of my head.. I want to say 26° but don't quote me. Good luck, you should have no issues. Keep me updated.

Sent from my XT1254 using Tapatalk
 
My setup is running really well, just don't have any numbers yet. Need to put a bar in before heading to the track. Probably won't make it this year but might get it on the dyno.


Sent from my iPhone using Tapatalk
 
p pump 24

I'm running 6/15 sticks, with a t4 s475 .90, with a benched pump, hamilton cam and o ringed, with 3 piece manifold
 
Snedge said:
I miss that truck.
Click to expand...

its for sale.

12118992_10153597597672349_3422163906171014345_n.jpg
 
You must log in or register to reply here.
Back
Top