Advertisement
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Home Who's Online Today's Posts HP Calculator CompD Gift Shop Mark Forums Read
Go Back   Competition Diesel.Com - Bringing The BEST Together > The Starting Line > Competition Vehicle Build Tech > Custom Fabrication
Register Members List Timeslips EFI Live Library Invite Your Friends FAQ Calendar Mark Forums Read

Closed Thread
 
Thread Tools
Old 10-03-2017, 02:41 PM   #1
getblown5.9
 
getblown5.9's Avatar

Name: getblown5.9
Title: Ceritified Kleenex Dealer
Status: Not Here
Join Date: Aug 2006
Location: Baltimore, MD
Member`s Gallery
Posts: 7,259
Cad files for cummins block/deck profile?

Does anyone have a cad or solidworks file or dimensioned drawing layout for the deck of a 5.9 block? Something that could be used to make an accurate torque plate?

Also looking for one with full details of oiling and cooling holes to have a copper head gasket cut.

Sent from my SAMSUNG-SM-G891A using Tapatalk
__________________
ONE PIECE AT A TIME -02 Dodge Ram 2500-Because...Pull Truck
07 Dodge 3500 SRW Megacab Laramie- 5.9/Auto, 250,000 miles, built for longevity
 
Old 10-03-2017, 03:19 PM   #2
CorneliusRox
 
CorneliusRox's Avatar

Name: CorneliusRox
Title: Seasoned Rookie
Status: Not Here
Join Date: Dec 2012
Location: Minneapolis, MN
Member`s Gallery
Posts: 3,608
Good luck!

You might have better luck requesting a DXF of the deck head.
__________________
Corey - BSME
Thumper - '97 12V Michigan Rust Bucket
Ares - '10 Rust-Free Family Hauler
 
Old 10-03-2017, 07:10 PM   #3
kleann
 
kleann's Avatar

Name: kleann
Title: VP44 pwr
Status: Not Here
Join Date: Aug 2008
Location: Down yonder
Member`s Gallery
Posts: 4,338
What block? vp or cr? Wouldn't matter for torque plate, but gasket I believe there are differences.

I could possibly find some time to model a thing or two.

Last edited by kleann; 10-03-2017 at 07:13 PM.
 
Old 10-03-2017, 07:22 PM   #4
kleann
 
kleann's Avatar

Name: kleann
Title: VP44 pwr
Status: Not Here
Join Date: Aug 2008
Location: Down yonder
Member`s Gallery
Posts: 4,338
And like cornelius said, the file you want depends on if you're wanting to get one machined or burned out(laser, plasma, water jet).

Last edited by kleann; 10-03-2017 at 07:25 PM.
 
Old 10-04-2017, 10:42 AM   #5
getblown5.9
 
getblown5.9's Avatar

Name: getblown5.9
Title: Ceritified Kleenex Dealer
Status: Not Here
Join Date: Aug 2006
Location: Baltimore, MD
Member`s Gallery
Posts: 7,259
File type doesn't really matter. I can convert or work with pretty much anything to get what I need.



Sent from my SAMSUNG-SM-G891A using Tapatalk
__________________
ONE PIECE AT A TIME -02 Dodge Ram 2500-Because...Pull Truck
07 Dodge 3500 SRW Megacab Laramie- 5.9/Auto, 250,000 miles, built for longevity
 
Old 10-04-2017, 10:43 AM   #6
getblown5.9
 
getblown5.9's Avatar

Name: getblown5.9
Title: Ceritified Kleenex Dealer
Status: Not Here
Join Date: Aug 2006
Location: Baltimore, MD
Member`s Gallery
Posts: 7,259
And this would be for a vp block.

Sent from my SAMSUNG-SM-G891A using Tapatalk
__________________
ONE PIECE AT A TIME -02 Dodge Ram 2500-Because...Pull Truck
07 Dodge 3500 SRW Megacab Laramie- 5.9/Auto, 250,000 miles, built for longevity
 
Old 10-04-2017, 09:44 PM   #7
QMFB
 
QMFB's Avatar

Name: QMFB
Title: Fastest Welder in Texas
Status: Not Here
Join Date: Apr 2016
Location: Corpus Christi, TX.
Member`s Gallery
Posts: 971
Watching this. I was searching for the same a few months ago. Wanted to have a Torque Plate water jet cut/ machine finished out of 2" stainless.
__________________
04 CCLB DRW - 6.4 Cummins, 80% S&S, 10mm CP3, AD165, 58/65/14 over 75/96/1.32, Arp's EVERYWHERE, 103# springs, HD pushrods, Fluidamper, ATS stage 6 48re, 1pc driveshaft, Flex-A-lites, remote Trans cooler, some other stuff..674HP - 1,369TQ. And growing.
 
Old 10-05-2017, 01:21 PM   #8
Tobin
 
Tobin's Avatar

Name: Tobin
Title: 5.7 IDI Powaa!
Status: Not Here
Join Date: Oct 2008
Location: Orlando, FL
Member`s Gallery
Posts: 1,056
That should be pretty easy to draw up if you are using as a torque plate. The holes can have some clearance. I believe once you get one cylinder bore/head bolt pattern figured out, you can just linear pattern it x6 to whatever the bore spacing is.
__________________
2006 Dodge QCLB 4x4 Goerend 48RE

1977 F250 "High Boy" 12 valve, 180 pump, 5x.014, S363/S475, Goerend 47RH, NP271, 2007 D60/Sterling 10.5, 40" Toyo MTs

1995 Dodge 2500 4x4 47RH SCLB
 
Old 10-06-2017, 05:42 AM   #9
06 DIESEL
 
06 DIESEL's Avatar

Name: 06 DIESEL
Title: Dead Eye Firearms LLC
Status: Not Here
Join Date: Sep 2007
Location: Airville, PA
Member`s Gallery
Posts: 4,748
I am sure that you have seen this thread. Not sure if the 12V and 24V will have the same head bolt spacing but they should since the blocks are interchangeable.

Solidworks CAD/CAM Diesel Repository - Competition Diesel.Com - Bringing The BEST Together
__________________
Travis

My rig - 06 Dodge Ram 2500 6.7 with 5.9 electronics

My DD - 14 Ram 1500 Ecodiesel

My Classic - 79 Chevy Silverado

Quote:
Originally Posted by RonA View Post
Trucks are like women. Sometimes you just need to spend money on them to keep them happy.
 
Closed Thread

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:08 PM.

 


Powered by vBulletin
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright ©2006 - 2018, CompetitionDiesel.com
all information found on this site is property of www.competitiondiesel.com