MaxSpool Engineering 60 mm 8620 billet cams

Here at MaxSpool engineering, we are pushing the envelope on cam technology. No cookie cutter parts here, this innovative, 60 mm 8620 billet cams, with matching roller bearings is the last word. These big cores allow us to offer big lobe lifts .550 while maintaining large base circle to maintain maximum control.
With 25 years of race cam program development, you can trust that you’re not getting a just good enough cam program , but the cutting edge

these 8620 billets are copper coated heat treated and ready to move air

Come on Greg....you should know better....:nopics:

Are these LSM billet cores?

WICKEDDIESELS said:

Are these LSM billet cores?

Click to expand...

NO LSM didn't do them, nore do they have them. I had them done myself, to my specs

I have decided that I will offer this is a roller version as well, this is going to use a Jesel style lifter .I have begun engineering the jig necessary so that Tommy can put lifter bore in the block in the correct alignment

The lobe lifts on the cores will surport 600+ lift on 24 valves and .900 lift on 12 valves with stock ratio rockers