Turbo spec compilation thread

Holset HE551Ve from 730 hp Scania, comp inducer 76mm, turbine 86/80mm, housing 40. Quite small turbine compared to compressor?
 
I purchased a HE451ve (use by new volvo truck engine)
comp- 92/62
turbine- 76(75)/67

It also have a billet comp wheel and housing is 9-29cm2
 

Attachments

  • DSC_0150.jpg
    DSC_0150.jpg
    80.2 KB · Views: 0
Stupid question, but i think i have seen a list on which stock turbos that was used on different years, on Cummins trucks. And also the spec. I have tried to search, but i cant find it.

//nilsson
 
anyone have any specs of Garretts GT 82/118 boreless billet comp wheel? Flow rate, max pressure ratio etc. Comp map might be too much to ask.
 
Leiffi said:
Holset HE551Ve from 730 hp Scania, comp inducer 76mm, turbine 86/80mm, housing 40. Quite small turbine compared to compressor?
Click to expand...

They fitted one of those to Cummins L10 race engine, I was quite sure it won't last even one lap except with very little fuel but I was wrong, it has now been tortured for 2 race weekends and lots of practising. They have not dynoed it but calculated hp is about 1050.
 
Hx60 turbine 86mm or 3.4". Has both a 12 blade and 11blade wheel. There is a wg24cm housing for 12 blade, monarch flange. There are 27gated, 22gated for the 12 blade 3.4. 11 and 12 blade housing not interchangeable.
 
AHall said:
Borg Warner

S200
Turbine Wheel
61.5/69.5
64/74
Comp Wheel
56/80-----58lbs/min
59/80-----61lbs/min
Housings
T3 .55, .70, .76, .85

S300
Turbine Wheel
65/xx, 68/76, 71/80, 73/80
Comp Wheel
57/83--------61lbs/min
60/84.5
62/88--------72lbs/min
63/87
64/92.5
66/91.5------76lbs/min
71/105.5-----86lbs/min
Housings
T3 .55, .70, .85
T4 .83, .88, .91, 1.00, 1.10, 1.25

K31
Turbine Wheel
74/83 <---for A5K, box BW measures 86/77, 12 blade
Comp Wheel
71/100-------95lbs/min
Housings
T3 .76
T4 .85, 1.0, 1.10
T6 1.28 w/g

S400
Turbine Wheel
74/83, 77/87, 80/87, 82/87, 82/92, 88/96
Comp Wheel
66/100
71/100-----89lbs/min
75/100-----100lbs/min
76/107-----104lbs/min
78/110
80/116-----120lbs/min
83/119
88/xx
91/xx
Housings
T4 1.0
T6 .90, 1.10, 1.32, 1.51

S500
Turbine Wheel
99/110
Comp Wheel
80/xxx
86/xxx
88/120-------145lbs/min
91/120-------155lbs/min
95/131.5-----160lbs/min
98/xxx
Housings
T6 .85, 1.00, 1.15, 1.45, 1.60

Holset

HX30
Turbine Wheel
52/65.5
Comp Wheel
44/73--------45lbs/min
Housings
T3 6cm

HY35
Turbine Wheel
58/65
Comp Wheel
54/78
Housings
T3 9cm

HX35
Turbine Wheel
58/70
Comp Wheel
54/78
54/83
56/83-----52lbs/min
60/86-----62lbs/min
62/86
Housings
T3 12cm, 14cm, 16cm

HX40
Turbine Wheel
64/76
Comp Wheel
58/83
60/83
60/86-----62lbs/min
62/86
Housings
T3 16cm, 18cm
T4 16cm, 17cm, 18cm, 19cm, 21cm

HE341
Turbine Wheel
58/65
Comp Wheel
54/xx
Housings
T3 9cm

HE351
Turbine Wheel
58/65
Comp Wheel
60/86-----65lbs/min
Housings
T3 9cm

HX50
Turbine Wheel

Comp Wheel
62/99
66/99
67.5/99
Housings

HX52
Turbine Wheel
70/84
Comp Wheel
64/99
66/99
67.5/99
71/99
Housings
T4I 16cm, 25cm

HX55
Turbine Wheel
73/xx
77/86
80/86
Comp Wheel
66/98
67/99
65/100
72/xxx
Housings
T6 19cm, 22cm, 25cm

HT3B
Turbine Wheel
86/97
Comp Wheel
73.5/109
Housings
T6 23cm, 26cm, 32cm

HX60
Turbine Wheel
86/97
90/97
Comp Wheel
76/102
80/112
Housings
T6 23cm

HT4B
Turbine Wheel
88/118
Comp Wheel
83/127
88/139
Housings
T6 26cm

HC5A
Turbine Wheel

Comp Wheel
87.5/127
88/139
Housings
T6 41cm

HX82
Turbine Wheel
94/126
Comp Wheel
82/140
Housings
T6 22cm, 25cm, 32cm, 36cm, 41cm, 48cm

Garrett

GT35
Turbine Wheel
62/68
Comp Wheel
61.5/82-----67lbs/min
62.5/82.5---75lbs/min(GTX)
Housings
T3 .63, .82, 1.06
T4 .63, .82, 1.06

GT37
Turbine Wheel
64/72.5
Comp Wheel
55/76-------50lbs/min
59/82-------56lbs/min
61.5/82-----67lbs/min
63.5/88-----68lbs/min
65/88------ 71lbs/min
68/94-------80lbs/min
Housings
T3 .89, .99, 1.11
T4 1.12

GT40
Turbine Wheel
68/77
Comp Wheel
63.5/88-----68lbs/min
65/88-------71lbs/min
68/94-------80lbs/min
Housings
T4 .85, .95, 1.06, 1.19, 1.34

GT42
Turbine Wheel
75/82
Comp Wheel
70/94------84lbs/min
70.5/94----98lbs/min(GTX)
75/102-----96lbs/min
76/102-----114lbs/min(GTX)
Housings
T4 1.01, 1.15, 1.28, 1.44
T6 1.01, 1.15, 1.28

TV4502
Turbine Wheel
78.5/85.5
Comp Wheel
65.5/91
Housings
T6 1.22

GT45
Turbine Wheel
80/87
Comp Wheel
80/108------112lbs/min
80/108------127lbs/min(GTX)
Housings
T4 1.01, 1.15, 1.28, 1.44

GT47
Turbine Wheel
84/93
Comp Wheel
80/108------112lbs/min
88/118------140lbs/min
Housings
T6 .96, 1.08, 1.23, 1.39

GT50
Turbine Wheel
91/99
Comp Wheel
81.5/118
Housings

TV8401
Turbine Wheel
97/108
Comp Wheel
84/117
Housings
T6 1.23

GT55
Turbine Wheel
102/111.5
Comp Wheel
84/123
88/118-----165lbs/min(GTX)
89/118.5---145lbs/min
91/133-----153lbs/min
91/133-----167lbs/min(GTX)
94/133-----160lbs/min
94/133-----181lbs/min(GTX)
106/141----185lbs/min
Housings
T6 1.0, 1.18, 1.24

GT60
Turbine Wheel
118/129.5
Comp Wheel
106/141-----185lbs/min
Housings
T6 1.25

G-Trim
Turbine Wheel
111/130
Comp Wheel

Housings

F-Trim
Turbine Wheel
106/130
Comp Wheel

Housings
Click to expand...

Great thread :pop:
 
I don't know much about turbo boost so I'll ask. What will a 66/68/12 T-3 foot boost to on an 06 common rail with 50hp injectors and EFI tuning? Asking because I'm not sure if I need head studs or not .
 
Some specs of my turbos I want to use as compounds

k29
turbine 82mm 69mm
12 blade. 12cm t3 wg housing divided.

compressor 61mm 88.5mm
7 blade. Something harder than alloy wheel by the looks?

K31

turbine
85mm 75mm
11 blade t3 20cm divided housing

compressor
71mm 94mm
7 blade billet alloy?

Both compressors seem pretty savage compared to most turbos ive worked on.
How would these go as twins on a 1st gen?
 
Garrett GTA4702BNS from Volvo D16, pn 728476-0001 , comp 70/102, turbine 92/84, 1.23 A/R , made about 800 clean hp at the crank for 600 000 km with not so perfect tuning, didn't blow, was just changed for bigger.
 
8927470 (tv8401). Comp .96 a/r Ind. 78mm. Exd. 116mm. Turbine 1.23 a/r Ind 106mm Exd. 94mm. From the information I've gathered on this it seems to have come off a 16v149. Has 4 of these and two super chargers puts out 1800 hp. Gunna use it in a set of twins under my 63/68/14.
 
For the s300 63mm, I think it flows 75lb, can anyone verify this?

And the s400 67mm (don't know exducer, I keep seeing 2 different numbers) flows 95lb (also needs verified)
 
I have some compressor weight data.
S475 Cast seven blade
S475 Billet six blade with intergraded nut
S478 Cast six blade

Stock s475

sugyja3a.jpg


S475 billet six blade intergraded nut

remyza3e.jpg


S478 Six blade

6yhyny5a.jpg
 
You must log in or register to reply here.
Back
Top