Hammer
Verbal Junk Author
Jim.....
The new pump sent to Antrim,and installed a couple of weeks ago for my truck,tonight has stopped running completely.Any attempt at changing the fuses out results in that fuse being blown.I have checked the wiring harness from front to back and even swapped in a new relay with no luck.I have also tapped the end of the motor as per the troubleshooting manual.
When you change the fuse out the motor sounds sluggish and then it will blow the fuse and leave you sit.The truck had no issues before going to work tonite and I am stumped at what I should do or look for next.I need to the truck for work and back in service as soon as I can..........Andy
The new pump sent to Antrim,and installed a couple of weeks ago for my truck,tonight has stopped running completely.Any attempt at changing the fuses out results in that fuse being blown.I have checked the wiring harness from front to back and even swapped in a new relay with no luck.I have also tapped the end of the motor as per the troubleshooting manual.
When you change the fuse out the motor sounds sluggish and then it will blow the fuse and leave you sit.The truck had no issues before going to work tonite and I am stumped at what I should do or look for next.I need to the truck for work and back in service as soon as I can..........Andy