Advertisement
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Home Who's Online Today's Posts HP Calculator CompD Gift Shop Mark Forums Read
Go Back   Competition Diesel.Com - Bringing The BEST Together > Tech Area- Dodge > Dodge Competition and Performance > P-Pump 24Valve
Register Members List Timeslips EFI Live Library Invite Your Friends FAQ Calendar Mark Forums Read

Closed Thread
 
Thread Tools
Old 01-05-2018, 01:49 AM   #1
AKDieseL
 
AKDieseL's Avatar

Name: AKDieseL
Title: Rookie
Status: Not Here
Join Date: Jan 2018
Location: Talkeetna, Alaska
Member`s Gallery
Posts: 29
A Few Questions: Cam, Throttle Cable

I know I'm kind of beating a long dead horse and I'm years behind, but I read thru every post on this forum that might have the answers to my questions, but couldn't find them. I've been reading for 2 days during any spare minute.

2001 near stock with manual transmission. Approx. 500k miles.
I believe I know of everything I need for the swap, but I'm wondering if I can modify my 24v throttle cable/pump linkage to work, or if I need to get a 12v cable or adapter kit. (Speedo and cruise already don't work, so if anything affected those specifically, I don't think it would be imperative).

Also, because of my budget, I was planning on running my current (stock) cam/cam gear with the pump swap, instead of buying bolt-together cam and gear, until I start pushing for more power. Is this a bad idea?

Lastly, I need to figure out the oil and fuel fittings, but I can chase those down myself from the interwebs and other posts, unless someone happened to know them off the top of their head.

Thanks in advance for any help.
 
Old 01-05-2018, 06:35 AM   #2
79powerwagon
 
79powerwagon's Avatar

Name: 79powerwagon
Title: Too Much Time
Status: Not Here
Join Date: Jul 2017
Location: MN
Member`s Gallery
Posts: 328
I did a complete 12v swap but used the 24v apps/throttle,

Adapted it to the side of the ppump and ran a heim joint linkage from the bottom side of 24v throttle lever (hole needs to be drilled in lever to bolt on heim joint) back to the pump lever.



Just my opinion on the cam but there's never going to be a better time to upgrade...
__________________
1979 Dodge Warlock W150 Ppump 12v/518

Last edited by 79powerwagon; 01-05-2018 at 06:38 AM.
 
Old 01-05-2018, 07:06 AM   #3
Stormin08
 
Stormin08's Avatar

Name: Stormin08
Title: Green Behind the Ears
Status: Not Here
Join Date: Jul 2016
Location: St Louis area / Lake Charles LA.
Member`s Gallery
Posts: 55
i believe crazy carl makes an apps mount plate for the fender well...


and the Grey Goat Thread in the 24v section has a full linkage swap from the 12v...check with wade (thundergunder) thread owner.
__________________
02 Sport with some upgrades
 
Old 01-05-2018, 08:27 AM   #4
jlbayes
 
jlbayes's Avatar

Name: jlbayes
Title: Too Much Time
Status: Not Here
Join Date: Mar 2011
Location: michigan
Member`s Gallery
Posts: 2,399
I used a stock cam as I was told all across the Internets it wouldn't make power. I have zero complaints about using the stock cam. I did drill and tap it for a retainer.
__________________
Jacob, 97 rclb
 
Old 01-05-2018, 11:34 AM   #5
AKDieseL
 
AKDieseL's Avatar

Name: AKDieseL
Title: Rookie
Status: Not Here
Join Date: Jan 2018
Location: Talkeetna, Alaska
Member`s Gallery
Posts: 29
Quote:
Originally Posted by 79powerwagon View Post
I did a complete 12v swap but used the 24v apps/throttle,

Adapted it to the side of the ppump and ran a heim joint linkage from the bottom side of 24v throttle lever (hole needs to be drilled in lever to bolt on heim joint) back to the pump lever.



Just my opinion on the cam but there's never going to be a better time to upgrade...
Could you show me a pic of that throttle cable set up?

And you are right about the cam, money is the issue tho. By my estimate I still need about $4-500 in parts for the swap, adding a cam and gear is like another $700 minimum.
 
Old 01-05-2018, 02:13 PM   #6
jlbayes
 
jlbayes's Avatar

Name: jlbayes
Title: Too Much Time
Status: Not Here
Join Date: Mar 2011
Location: michigan
Member`s Gallery
Posts: 2,399
Use the stock cam. The isb vp cam is one of the best factory cams imo. Just buy a gear retainer and bolt. Takes 10min to drill and tap it.
__________________
Jacob, 97 rclb
 
Old 01-05-2018, 02:21 PM   #7
wilmesbm

Name: wilmesbm
Title: Too Much Time
Status: Not Here
Join Date: Apr 2010
Member`s Gallery
Posts: 362
Quote:
Originally Posted by jlbayes View Post
I used a stock cam as I was told all across the Internets it wouldn't make power. I have zero complaints about using the stock cam. I did drill and tap it for a retainer.
Are you running a 13mm pump or still a 12mm?
__________________
02 Dodge 2500, p7100 swap, 6x18s, 64/485 compouds, tranny

03 Dodge 3500 Towrig, 3800lb DD, 60/68/.91, smarty s06
 
Old 01-05-2018, 10:25 PM   #8
TheSilverBullet
 
TheSilverBullet's Avatar

Name: TheSilverBullet
Title: All the correction factor
Status: Not Here
Join Date: Jan 2012
Location: Franklin,IA
Member`s Gallery
Posts: 1,598
Crazy Carl’s kit is 170 bucks if you want bolt on. I made my own for about 40 bucks if you google it there’s a lot of guys that’s made brackets to bolt the apps on the P7100.
__________________
99 3500 black Laramie~Infinitive Performance Farrel Diesel Service Goerend Transmissions
98 12 valve with all the goodies from 2008
90 w250 "brownie" straight 6 standard transmission


Quote:
Originally Posted by dvst8r View Post
Dying is always a way bigger concern than egt's...
 
Old 01-06-2018, 03:24 AM   #9
AKDieseL
 
AKDieseL's Avatar

Name: AKDieseL
Title: Rookie
Status: Not Here
Join Date: Jan 2018
Location: Talkeetna, Alaska
Member`s Gallery
Posts: 29
Quote:
Originally Posted by TheSilverBullet View Post
Crazy Carl’s kit is 170 bucks if you want bolt on. I made my own for about 40 bucks if you google it there’s a lot of guys that’s made brackets to bolt the apps on the P7100.
I just grabbed a locals Crazy Carl bracket. Gonna fab one up tomorrow hopefully. Then I just need the heim joints/rod and make the other brackets.
 
Old 01-08-2018, 08:12 AM   #10
jlbayes
 
jlbayes's Avatar

Name: jlbayes
Title: Too Much Time
Status: Not Here
Join Date: Mar 2011
Location: michigan
Member`s Gallery
Posts: 2,399
Quote:
Originally Posted by wilmesbm View Post
Are you running a 13mm pump or still a 12mm?
13mm is on it now.
__________________
Jacob, 97 rclb
 
Closed Thread

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:04 AM.

 


Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2006 - 2024, CompetitionDiesel.com
all information found on this site is property of www.competitiondiesel.com