Will this work?
So, I removed the bed on my 4th gen to change the sending unit, clean up some surface rust, and other little stuff.
Once it was off, I saw that the rubber piece spanning the bottom front of the bed that keeps water out of the cab vents has rubbed a ~4'x.75" spot on the cab down to bare metal.
I don't want to remove that piece, and obviously don't want bare metal. What I've come up with is a spray can of touch up paint (Dodge PDA paint code) and 3m PPF to put over it once dry.
Since the truck is silver-ish, I decided that would be a good place to decide if the touch up paint is good enough for other spots on the truck that are chipped, or if I'll have to get a pro to blend it.
Anyways, does the peanut gallery think this is an OK solution, or am I just wasting my time?
__________________
97 Dodge 2500 RCLB ( scrapped)
1973 F250 crew (soon to receive new power train)
COMPD:
Quote:
Originally Posted by rcfreak24
Lolzzzzzz fakin haters
|
|