Advertisement |
|
|
|
If this is your first visit, be sure to check out the FAQ by clicking the link above.
You may have to register before you can post: click the register link above to proceed.
To start viewing messages, select the forum that you want to visit from the selection below.
|
Dodge Competition and Performance General Dodge Competition and Performance Discussion |
10-22-2018, 12:16 AM
|
#1
|
Name: 79fordcrew
Title: Banned
Status: Not Here
Join Date: Mar 2014
Member`s Gallery
Posts: 130
|
No overdrive now tc won't unlock
Ok guys need some help. My stock tranny went out so I was surfing Craigslist and a guy had a a built Suncoast for sale so I bought it. My truck is an 04.5 and trans came out of 06. Got it put in and went for a test drive and it wouldn't go into overdrive. Brought it home put a scan tool on and it said I had a trans temp circuit high and low input on pressure line. Cleared codes and went for another drive still no of but when I came back towards town the tc locked up and now won't unlock. Other than this the trans felt amazing. I looked at codes again this time I had a low input to tcm. Cleared it and put it in drive and it killed it . No codes came back up it will kill it in any gear except reverse. I unhooked my 8pin connector and it still does it.im lost on this one and hoping maybe it's the tc and od solenoids. The truck the trans came out of had an engine fire and it burnt the wires to the trans and the flat plug that has like 5 wires running to it not sure what it is but I took mine off my trans and put on it. Any help is greatly appreciated.
|
|
|
10-22-2018, 09:16 AM
|
#2
|
Name: SPEEDSHIFT
Title: Too Much Time
Status: Not Here
Join Date: Jan 2007
Location: San Antonio, TX
Member`s Gallery
Posts: 5,978
|
It may have got some trash in the solenoid screens, I would pull them out and replace or clean them and go for a drive. I assume it has fresh fluid and a new filter in it?
__________________
@bodie_armstrong
2003 2500 4x4 auto FOR SALE
2005 2500 4x4 auto Drag Truck
2013 3500 4x4 Aisin Dually Tow Rig
Tenacity Tuning, Longs Machine Shop, BD Diesel Performance
|
|
|
10-22-2018, 01:27 PM
|
#3
|
Name: 79fordcrew
Title: Banned
Status: Not Here
Join Date: Mar 2014
Member`s Gallery
Posts: 130
|
Yes new fluid and filter
|
|
|
10-22-2018, 02:34 PM
|
#4
|
Name: Mark Nixon
Title: No Savior among the flesh
Status: Not Here
Join Date: Feb 2009
Location: Brownville, Nebraska
Member`s Gallery
Posts: 8,676
|
I'm no automatic expert, but are the solenoid packs the same on the '03-'04 trans as the '05-'07s?
Also, a 2006 uses the TVM, whereas a '03-'04 uses a cable with an arm.
I'm pretty sure you would have swapped that around, though.
Mark.
__________________
If you or I did business like the PEOPLE in government do business, we'd be put in jail. Government is coercive.
Anarchy: The state of existence where there are no masters & no slaves. Therefore, Anarchy means the ABSENCE OF SLAVERY, or, in other words, FREEDOM.
|
|
|
10-22-2018, 04:04 PM
|
#5
|
Name: 79fordcrew
Title: Banned
Status: Not Here
Join Date: Mar 2014
Member`s Gallery
Posts: 130
|
Yes I swapped that and mine is a late 04 so the selenoids are the same
|
|
|
10-23-2018, 08:46 PM
|
#6
|
Name: spooled05
Title: Too Much Time
Status: Not Here
Join Date: Jul 2008
Location: Weatherford ,Tx
Member`s Gallery
Posts: 832
|
Did you flush your cooler and lines really good ? I say there’s likely some trash in the solenoids.
__________________
05 q/c 4x4 dually,twins,dual fuelers HP tuners,Flux inj., Mitusa gusher,full billet DTT!
|
|
|
10-23-2018, 10:12 PM
|
#7
|
Name: jpschade
Title: Green Behind the Ears
Status: Not Here
Join Date: Mar 2012
Member`s Gallery
Posts: 58
|
i would suspect the lockup/od solenoids
__________________
97 dodge eclb SAC 5x14's, 467.7 fmw , 024s, tork tek ofv, fully built trans, dpc triple disc, no fuel plate, afc live, 4k gov springs, 28* timing, t4 steed w/ 44mm tial, racked barrels
1990 w250 5 speed cranked pump
2006 rclb 4wd stock for now
|
|
|
10-23-2018, 10:49 PM
|
#8
|
Name: 79fordcrew
Title: Banned
Status: Not Here
Join Date: Mar 2014
Member`s Gallery
Posts: 130
|
Ok so just changed the selenoids and tc is working but still no overdrive.
|
|
|
10-24-2018, 08:16 AM
|
#9
|
Name: SPEEDSHIFT
Title: Too Much Time
Status: Not Here
Join Date: Jan 2007
Location: San Antonio, TX
Member`s Gallery
Posts: 5,978
|
Quote:
Originally Posted by 79fordcrew
Ok so just changed the selenoids and tc is working but still no overdrive.
|
Put a test gauge on the OD port and see if its trying to engage. Have you ran a scanner on the truck to see what the ECM is commanding?
__________________
@bodie_armstrong
2003 2500 4x4 auto FOR SALE
2005 2500 4x4 auto Drag Truck
2013 3500 4x4 Aisin Dually Tow Rig
Tenacity Tuning, Longs Machine Shop, BD Diesel Performance
|
|
|
10-24-2018, 02:06 PM
|
#10
|
Name: 79fordcrew
Title: Banned
Status: Not Here
Join Date: Mar 2014
Member`s Gallery
Posts: 130
|
The scanner I have won't tell me if it's commanding od. No codes and I hooked a wire to pin 6 and grounded it to see if I had a faulty harness. Where is of port and what kind of gauge is needed. Also when I changed selenoids of tc there was yellow like plastic all chewed up in pan. There was like half a yellow plastic almost like a seal in bottom of the pan. Would that be the od seal maybe
|
|
|
10-24-2018, 02:25 PM
|
#11
|
Name: Timbeaux
Title: Administrator and Head Thread Derailer
Status: Not Here
Join Date: Apr 2006
Location: Heart of Dixie
Member`s Gallery
Posts: 17,238
|
Can you just wire in a switch to call OD on an 06 tranny?
__________________
COMPETITIONDIESEL.COM BRINGING THE BEST TOGETHER
F250(DD) ANOTHER TRUCK (PROGRAM) NO LIMIT FAB, DIESEL SOUTH, DC CUSTOMS
Quote:
"I just love everything about racing. I wanna race every single day. Its nothing for me to be cutting grass and the neighbor hoss the gas on his mower, and there we are, lined up in the the middle of the street." - Stevie KillinTime Jackson
|
"A gainst stupidity, the gods themselves fight unvictorious."
中
|
|
|
10-24-2018, 04:52 PM
|
#12
|
Name: 79fordcrew
Title: Banned
Status: Not Here
Join Date: Mar 2014
Member`s Gallery
Posts: 130
|
My truck is a 04.5
|
|
|
10-26-2018, 09:40 AM
|
#13
|
Name: SPEEDSHIFT
Title: Too Much Time
Status: Not Here
Join Date: Jan 2007
Location: San Antonio, TX
Member`s Gallery
Posts: 5,978
|
Quote:
Originally Posted by 79fordcrew
The scanner I have won't tell me if it's commanding od. No codes and I hooked a wire to pin 6 and grounded it to see if I had a faulty harness. Where is of port and what kind of gauge is needed. Also when I changed selenoids of tc there was yellow like plastic all chewed up in pan. There was like half a yellow plastic almost like a seal in bottom of the pan. Would that be the od seal maybe
|
The OD seal is black, I have got some ATF from Oreilys before that had some yellow trash in it and clogged my trans up almost the same way. It was a plastic film.
__________________
@bodie_armstrong
2003 2500 4x4 auto FOR SALE
2005 2500 4x4 auto Drag Truck
2013 3500 4x4 Aisin Dually Tow Rig
Tenacity Tuning, Longs Machine Shop, BD Diesel Performance
Last edited by SPEEDSHIFT; 10-26-2018 at 09:49 AM.
|
|
|
10-26-2018, 08:41 PM
|
#14
|
Name: 79fordcrew
Title: Banned
Status: Not Here
Join Date: Mar 2014
Member`s Gallery
Posts: 130
|
Ironically that is exactly where I got the atf from but there was like half a round yellow thin plastic washer like thing in the bottom of the pan. I cleaned it all real good and tranny is working flawlessly other than no od. I don't have a gauge to test pressure. I do have the od unit off my old trans and I am going to throw it on and see if that fixes it as I have the d&j gp selenoid and transducer in it and still no od so my only option is to throw it in. I am pretty sure that is my problem.
|
|
|
10-27-2018, 11:08 AM
|
#15
|
Name: thatguy69
Title: Too Much Time
Status: Not Here
Join Date: Jul 2011
Location: Mansfield Ohio
Member`s Gallery
Posts: 2,023
|
Be a whole lot less work to find a gauge and throw on it, you can make one up from parts at any hardware store. You can switch od housings if you want, but the piston is what engages od, and the piston for that is in the trans assembly, not od assembly.
__________________
1999 Compound 24v Rust Rocket
2008 F350 P24v/Allison
|
|
|
10-27-2018, 03:11 PM
|
#16
|
Name: 79fordcrew
Title: Banned
Status: Not Here
Join Date: Mar 2014
Member`s Gallery
Posts: 130
|
It was the overdrive. It's fixed now the piston comes off with od unit and the outer seal was torn. I still plan on getting gauges
|
|
|
10-27-2018, 03:55 PM
|
#17
|
Name: 79fordcrew
Title: Banned
Status: Not Here
Join Date: Mar 2014
Member`s Gallery
Posts: 130
|
Not trying to be smart with you but isn't the piston the round deal with an inner and outer seal on it? Maybe it's called something else. Either way the outer seal was tore up so I swapped and now all is well. Thanks for all the help everyone
|
|
|
10-27-2018, 09:49 PM
|
#18
|
Name: thatguy69
Title: Too Much Time
Status: Not Here
Join Date: Jul 2011
Location: Mansfield Ohio
Member`s Gallery
Posts: 2,023
|
No that's the piston. But the cylinder it rides in is in the back of the transmission case
__________________
1999 Compound 24v Rust Rocket
2008 F350 P24v/Allison
|
|
|
10-27-2018, 11:14 PM
|
#19
|
Name: 79fordcrew
Title: Banned
Status: Not Here
Join Date: Mar 2014
Member`s Gallery
Posts: 130
|
I got ya either way we're all fixed up and good to go
|
|
|
10-29-2018, 08:36 PM
|
#20
|
Name: 79fordcrew
Title: Banned
Status: Not Here
Join Date: Mar 2014
Member`s Gallery
Posts: 130
|
What would cause my tranny to slip to the point it won't move but then you can shut it off for a few seconds turn it on and it will take off fine for a block and then start doing the same thing. Plugged filter, rebuild time, governer pressure?
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -5. The time now is 05:35 AM.
|