12V wet block life

bigstacks95 said:

Everyone drastically overestimates how fast filled blocks heat up. A good external oil cooler with big lines and a good fan helps also.

Click to expand...

Any pictures of said setup ect

Ill see if I can dig some up. Basically I built a plate that goes where the factory oil cooler/ filter adaptor goes that matches up with the 3 ports, one is pressure out (from the oil pump) one is pressure in (to the mains, cam, etc) and one is the return back to the pan. I use a Petersen pressure relief valve and a decent size filter like 12x12, and an oil filter head.