Switching Edge EGT Probe to an Isspro Probe?
Anyone tried this? I'm certain the probe in my 2012 is bad because at idle in park or neutral the displayed temperature climbs from 600 to 1000 after a few minutes. Seems simple since it's still a simple two wire connection, but i don't know if all probes transmit the same signal, or if they are gauge specific (e.g. if .5V = 1000 on an Edge but .5V on an Isspro = 500).
__________________
2003 2500 QCSB 4x4 3.73 - Firepunk HPT Tuned, BBI Stage 2's, DAP 63/68/12, Hamilton [624/1050 and 680/1206 with Water/Meth]
2012 2500 CCSB 4x4 3.73 Firepunk EFI and Comp3, D&J Built 6.7L, S&S 200%, ATS Dual CP3 w/ Exergy 12mm, S366/S483 Compounds [1086/2289]
|