Hx35 14cm housing/ ht3b 26cm twin setup just rebuilt

turninheadz94

turninheadz94

casey ross
Joined
Mar 14, 2011
Messages
128
Im selling my hx35 with banks 14cm exhaust housing with custom made drive pressure spring wastegate, and ht3b holset 76mm and 26cm exhaust housing both turbos just rebuilt with 400 miles on them still on truck. Comes with all oil lines and brackets you will need to put on your truck i mean everything! Besides air filter. Has 5" downpipe included too. Cold pipe is tapped for boost gauge as well. Will take 1500$ shipped or trade for a 64/71 or 62/65 or 63/70 single and some. Might even do a package deal with my 5x14s for 1800 and your stockers or cores.

e7f193e3.jpg

d079be14.jpg

c80d7769.jpg
 
Yep comes with the bung to go into the pan as well. Ht3b mount bolts to the exhaust manifold using the stock bolts and other piece bolts into the oil drain bolts and has drain nipple attached to it. Harder to explain in text lol
 
I'm wondering what it would take for this to work on a 24v and what kind of boost does it make
 
james9999 said:
I'm wondering what it would take for this to work on a 24v and what kind of boost does it make
Click to expand...

There's as many hx35/ht3b twins as there is no fuel plate p pumps running around. It makes boost or nobody would do the combo. Got to YouTube it will have your boost number but it all depends on your engine.
 
Not even a different manifold, you flip yours upside down and wala bolt everything else up. Not sure on boost havent really got down in it too much plus my boost gauge only goes to 30
 
I gotta have my truck to start my new job at holt cat monday so im not gonna be able to sell these till i find another turbo and injectors first..
 
james9999 said:
I'm wondering what it would take for this to work on a 24v and what kind of boost does it make
Click to expand...

My 35/ht3b twins on my 97 pulled about 60 psi. Could've been more, but my gauge only went to 60, and I didn't wanna blow a headgasket, so I only got in it a few times
 
I still have it but cant sell due to this being my dd. so id trade for a turbo first and cash
 
Would you ship it to pennsylvania? I have a he351ve and adapter to t3
 
I just joined recently and can't send pm's yet . My cell is 6103689192 if your interested in the he351ve and cash text or call me I'm really interested in this setup for my first gen. Not sure if the injectors would work in a first gen.
 
You must log in or register to reply here.
Back
Top