- Joined
- Jan 22, 2007
- Messages
- 32,023
I figured out where and how I'm going to mount the setup. I basically took the bolts out of the sway bar and put a mounting bracket between the bushing mount and the frame. I'll put the same backet thickness on the other side so the bar won't be twisted.
I just lack buyin' a Amsoil bypass filter and cutting the hoses to length once I get it all mounted up. A couple hydraulic crimps and it'll be good to go.
Just throwing this out there in case anyone else wants new ideas on where to mount filters. The hoses will just turn straight up into the OEM location.
The paint wasn't quite dry on the bracket. I get a little impatient sometimes. The brass 90 on the end will allow me to drop a plug and let the lines and filters drain out into a bucket. Hopefully it will keep the mess to a minimum.
I just lack buyin' a Amsoil bypass filter and cutting the hoses to length once I get it all mounted up. A couple hydraulic crimps and it'll be good to go.
Just throwing this out there in case anyone else wants new ideas on where to mount filters. The hoses will just turn straight up into the OEM location.
The paint wasn't quite dry on the bracket. I get a little impatient sometimes. The brass 90 on the end will allow me to drop a plug and let the lines and filters drain out into a bucket. Hopefully it will keep the mess to a minimum.
Last edited: