Adjustable Fuel Plate W/O taking off AFC. - Competition Diesel.Com

Blackbumper · 03-23-2008, 10:54 AM

I know I seen something like this on the internet it's a replacement housing that allows you to adjust your fuel plate setting with out taking off the AFC housing. It's been a while since I ran across it so I'm not sure exactly how it's setup. Just trying to find more info on it.
Thanks

schaef_12 · 03-23-2008, 02:04 PM

I would definatly be interested in more info on that. That's the closest thing to an adjustable chip as I'll ever get!

ride42 · 03-23-2008, 03:25 PM

I'm sure a lot of people would be interested. See if you can find it again, sounds pretty cool.

Bryce

Highfinance97 · 03-23-2008, 04:42 PM

Scheids Lightning pump is fully adjustable by a screw but i believe you have to take off the cover

Michael

Blackbumper · 03-23-2008, 10:05 PM

I think something like this would definetely help in tuning at the track but I would be worried about how the foot lines up with the plate as you adjust this. I've been playing around with some different ideas and setups with an old cover and it has some merit but the problem I have above is still an issue.

zstroken · 03-24-2008, 06:42 AM

Pretty much I think they are adjusting the AFC anyway the pieces that do this. It twisting the starwheel if I remember right.

Clutch1 · 03-24-2008, 12:43 PM

yeah it was some sort of cable that went through the back of the housing but like was mentioned it was all on the afc.

oldsmokey97 · 03-27-2008, 07:51 PM

i had seen one one time that all it was was a piece of billet aluminum plate that had two different plate profiles welding on both sides. so, if you wanted to run a zero plate, you could. But then if you wanted something tamer for the street, all you had to do was unbolt it and flip it over. No afc that way but it was a really good idea.

Lance

Highfinance97 · 03-27-2008, 07:56 PM

Gene what ever came of this????

Billet Smoke control

03-23-2008, 10:54 AM	#1
Blackbumper Name: Blackbumper Title: Could be worse! Status: Not Here Join Date: Dec 2006 Location: Nebraska Member`s Gallery Posts: 350	Adjustable Fuel Plate W/O taking off AFC. I know I seen something like this on the internet it's a replacement housing that allows you to adjust your fuel plate setting with out taking off the AFC housing. It's been a while since I ran across it so I'm not sure exactly how it's setup. Just trying to find more info on it. Thanks __________________ 2006 Dodge Mega Cab 1994 Dodge 2500 4x4 Reg Cab 5spd 3.55's, s400, 13mm pump. Hamilton Diesel Top end and cam, Engineered Diesel Turbo and Gate.

03-23-2008, 02:04 PM	#2
schaef_12 Name: schaef_12 Title: Diesel Junkie Status: Not Here Join Date: Oct 2007 Location: Ferdinand, ID Member`s Gallery Posts: 202	I would definatly be interested in more info on that. That's the closest thing to an adjustable chip as I'll ever get! __________________ 98 12v CC shorty, 2 TONE!!

03-23-2008, 03:25 PM	#3
ride42 Name: ride42 Title: Le wifi Status: Not Here Join Date: Jan 2007 Location: Murray, Utah Member`s Gallery Posts: 4,020	I'm sure a lot of people would be interested. See if you can find it again, sounds pretty cool. Bryce __________________ Should have combined to save brains.

03-24-2008, 06:42 AM	#6
zstroken Name: zstroken Title: For $$$ your name here Status: Not Here Join Date: Sep 2006 Location: Southwest MO Member`s Gallery Posts: 10,833	Pretty much I think they are adjusting the AFC anyway the pieces that do this. It twisting the starwheel if I remember right. __________________ 01 HO featuring F1, HTT, SouthBend, Haisley 97 Dodge under construction... 24V P-Pump Mafia member #2 Thanks to Mumau Diesel, Goerend Transmission, Hamilton, Disturbed Motorsports, Northeast Diesel Service!

03-24-2008, 12:43 PM	#7
Clutch1 Name: Clutch1 Title: Diesel Pro Status: Not Here Join Date: Jun 2007 Member`s Gallery Posts: 253	yeah it was some sort of cable that went through the back of the housing but like was mentioned it was all on the afc. __________________ THE JUNE BUG BUGGY!!!!! 97, 5spd 08, 6spd 4wd

03-23-2008, 10:05 PM	#5
Blackbumper Name: Blackbumper Title: Could be worse! Status: Not Here Join Date: Dec 2006 Location: Nebraska Member`s Gallery Posts: 350	I think something like this would definetely help in tuning at the track but I would be worried about how the foot lines up with the plate as you adjust this. I've been playing around with some different ideas and setups with an old cover and it has some merit but the problem I have above is still an issue.

03-27-2008, 07:51 PM	#8
oldsmokey97 Name: oldsmokey97 Title: Diesel Pro Status: Not Here Join Date: Aug 2006 Member`s Gallery Posts: 733	i had seen one one time that all it was was a piece of billet aluminum plate that had two different plate profiles welding on both sides. so, if you wanted to run a zero plate, you could. But then if you wanted something tamer for the street, all you had to do was unbolt it and flip it over. No afc that way but it was a really good idea. Lance __________________ COMPETITIONDIESEL.COM Bringing the BEST Together

03-27-2008, 07:56 PM	#9
Highfinance97 Name: Highfinance97 Title: Garofalo Enterprises Status: Not Here Join Date: Jul 2006 Location: Clarks summit PA. Member`s Gallery Posts: 3,843	Gene what ever came of this???? Billet Smoke control

Advertisement

Want to advertise?