Not diesel, BUT DAMN 950 HP - Competition Diesel.Com

*Dalpilot* · 04-14-2009, 10:25 PM

This was on the lift getting an alignment today, this is from under the car.

and this is what it was attached to.

Ford GT

Bosshawg600 · 04-14-2009, 10:26 PM

Someone Has GoldDigger Money!!!!!

roachie · 04-14-2009, 10:28 PM

Ive seen videos of that car or one like it.

Stock engine with injectors and tuning made 1010hp IIRC

Insane how quick it was, 70 to 180 in about 3 seconds

'strokeThis_'07 · 04-14-2009, 10:38 PM

70 to 180 in 3 seconds? Only if they were taping the speedo and the tires broke loose.

I dont see anyway possible that car could even remotely accelerate that fast...

LOGANSTANFORTH · 04-14-2009, 10:45 PM

Quote:

Originally Posted by roachie

Ive seen videos of that car or one like it.

Stock engine with injectors and tuning made 1010hp IIRC

Insane how quick it was, 70 to 180 in about 3 seconds

i just dont see that on a set of 5.4 ford factory injectors and head gaskets.......they will take boost but........

roachie · 04-14-2009, 11:04 PM

I seen it, it was insane. Everybody that rode in it was WHITE when they got out. It had severe traction issues.

Havent been able to find that vid ever since. Its been 2 years or more though.

Engine may have been built, I seem to distinctly remember them saying it was stock excluding the fuel system.

riversidediesel · 04-14-2009, 11:08 PM

We had a GT 1000 in the shop for an alignment a few months ago that Hennessey dropped off. The old timers that saw it didn't have a clue what it was. I lost count of how many people's heads turned to look at it when they were driving by.

http://www.hennesseyperformance.com/...ctionReq=Where

roachie · 04-14-2009, 11:19 PM

Quote:

Power:
1000+ HP
865 lb-ft Torque

Performance:
0-60: 2.6 sec.
1/4 mile: 10.6 @ 142 mph
Top Speed: 240+ mph

Includes:
Twin Garrett Ball Bearing Turbos
Stainless Steel Turbo Exhaust
Stainless Steel Turbo Down Pipes
Billet Throttle Body Upgrade
Twin Tial Wastegates
Air to Water Intercooler
Custom Intake Manifold
Fuel System Upgrade
Upgraded Mass Air Sensor
CV-Shaft Bolt Upgrade
Custom Tuned Engine Management Software
Professional Installation
Chassis Dyno Tuning & Testing
Road Tuning & Testing

Stock long block with a fuel system. Makes you wonder how much power can be made if you build it

charbroiled · 04-14-2009, 11:42 PM

http://videos.streetfire.net/video/J...-IMV_71057.htm

heres a link to the video of the buildup... hes only running like 17lbs of boost if that. better get a roll of papertowels, grab your d!ck and, and double click

LOGANSTANFORTH · 04-14-2009, 11:46 PM

Quote:

Originally Posted by roachie

Stock long block with a fuel system. Makes you wonder how much power can be made if you build it

check out any Mod motor shootout mustang......they make 1500 on a stock sleeved truck block......

JFlagg · 04-14-2009, 11:56 PM

Quote:

Originally Posted by riversidediesel

We had a GT 1000 in the shop for an alignment a few months ago that Hennessey dropped off. The old timers that saw it didn't have a clue what it was. I lost count of how many people's heads turned to look at it when they were driving by.

http://www.hennesseyperformance.com/...ctionReq=Where

Thats a sexy a$$ car in that ad...

SmokeShow · 04-15-2009, 08:29 AM

1000+ hp and it can only muster a 10.6 quarter??? Trucks with 1000rwhp diesels do that and weigh twice as much. What gives? Stock tires? Chitty driver?

C-ya

SCHOOL BUS · 04-15-2009, 08:54 AM

Quote:

Originally Posted by roachie

I seen it, it was insane. Everybody that rode in it was WHITE

Why does that matter???

Lol just messing

*GRotman* · 04-15-2009, 09:19 AM

Quote:

Originally Posted by charbroiled

http://videos.streetfire.net/video/J...-IMV_71057.htm

heres a link to the video of the buildup... hes only running like 17lbs of boost if that. better get a roll of papertowels, grab your d!ck and, and double click

*Dalpilot* · 04-15-2009, 09:22 AM

It was a beautiful setup. Said he paid an extra 30K for the turbo setup.

riversidediesel · 04-15-2009, 09:36 AM

I found a receipt in the second GT that they brought for an alignment, the price tag for the twin install was $45K

BgBlDodge · 04-15-2009, 10:42 AM

Seen a few of those in a couple of shops around here. Saw one driving through the best buy parking lot on 183 the other night. It was red and white striped. Sounded freaking wicked.

JasonCzerak · 04-15-2009, 10:55 AM

Quote:

Originally Posted by SmokeShow

1000+ hp and it can only muster a 10.6 quarter??? Trucks with 1000rwhp diesels do that and weigh twice as much. What gives? Stock tires? Chitty driver?

C-ya

There is such a thing as "too much HP". This is one example.

There is a show on speed by Tanner Foust called "super car" something. He had a show on a air strip where local GT, GT1000, vette, porsche owners all came out.. the GT1000's didn't stand a chance. there is one porsche I suspect is around 1000hp, AWD and looks like grandma's car too ;-)

Dockboy · 04-15-2009, 11:12 AM

Quote:

1st gear...forget it, 2nd gear....you can peddle it, 3rd gear....you can mat it....................it's 700 ft/lbs of torque!!

Imagine what he would say if he drove my truck!!!

JFlagg · 04-15-2009, 01:22 PM

Quote:

Originally Posted by Dockboy

Imagine what he would say if he drove my truck!!!

Oh ****! I think that was a rod/piston/crank that just hit the pavement?

04-14-2009, 10:25 PM	#1
Dalpilot Name: Dalpilot Title: Joe Nobody! Status: Not Here Join Date: Apr 2006 Location: Austin, Texas Member`s Gallery Posts: 10,379	Not diesel, BUT DAMN 950 HP This was on the lift getting an alignment today, this is from under the car. and this is what it was attached to. Ford GT __________________ COMPETITIONDIESEL.COM Bringing the best together Rev-X oil additive dealer.

04-14-2009, 10:26 PM	#2
Bosshawg600 Name: Bosshawg600 Title: PDP.com FireFighter Status: Here Join Date: Aug 2006 Location: Monticello,In Member`s Gallery Posts: 2,121	Someone Has GoldDigger Money!!!!! __________________ Jeff Faker 06 Mega, 6sp, Twins, 36's yada yada yada..... 93 Dodge DRW - Project "GOVT MULE" Pulling truck Big Thanks to- PureDieselPower.com, South Bend Clutch, Diamond Engine and Machine

04-14-2009, 10:28 PM	#3
roachie Name: roachie Title: Taco Master Status: Not Here Join Date: Nov 2007 Location: East TN Member`s Gallery Posts: 6,262	Ive seen videos of that car or one like it. Stock engine with injectors and tuning made 1010hp IIRC Insane how quick it was, 70 to 180 in about 3 seconds __________________ 01 real hot dynamic timing pump, banks sixgun/hypertech stack 04 F250.......NV5600 CR's suck.

04-14-2009, 10:38 PM	#4
'strokeThis_'07 Name: 'strokeThis_'07 Title: Diesel Pro Status: Not Here Join Date: Dec 2006 Location: Riverton, WY Member`s Gallery Posts: 624	70 to 180 in 3 seconds? Only if they were taping the speedo and the tires broke loose. I dont see anyway possible that car could even remotely accelerate that fast... __________________ '07 3500 QuadCab/ Longbox 48RE 7" GR mitres, AFE Stg. 2, Smarty TNT, billet HTS '03 2500 QuadCab/Longbox HO 305/555 6spd.

04-14-2009, 11:08 PM	#7
riversidediesel Name: riversidediesel Title: Grease Monkey Status: Not Here Join Date: Jun 2007 Location: Sealy, TX Member`s Gallery Posts: 175	We had a GT 1000 in the shop for an alignment a few months ago that Hennessey dropped off. The old timers that saw it didn't have a clue what it was. I lost count of how many people's heads turned to look at it when they were driving by. http://www.hennesseyperformance.com/...ctionReq=Where __________________ 2002 Dodge 3/4 ton 4x4, Auto Smarty, 150 HP JL's, TST Powermax 3, FASS, KSB-1 Kwik Spool w/ TIAL wastegate, O'ringed, ARP's, HD Springs, HD Cam, Custom Billet Transmission by Relentless Diesel

04-14-2009, 11:04 PM	#6
roachie Name: roachie Title: Taco Master Status: Not Here Join Date: Nov 2007 Location: East TN Member`s Gallery Posts: 6,262	I seen it, it was insane. Everybody that rode in it was WHITE when they got out. It had severe traction issues. Havent been able to find that vid ever since. Its been 2 years or more though. Engine may have been built, I seem to distinctly remember them saying it was stock excluding the fuel system.

04-14-2009, 11:42 PM	#9
charbroiled Name: charbroiled Title: undisputed Status: Not Here Join Date: Feb 2009 Location: chocolate city, USA Member`s Gallery Posts: 27	http://videos.streetfire.net/video/J...-IMV_71057.htm heres a link to the video of the buildup... hes only running like 17lbs of boost if that. better get a roll of papertowels, grab your d!ck and, and double click __________________ 08 6.7 cummins... plus or minus a few things

04-15-2009, 08:29 AM	#12
SmokeShow Name: SmokeShow Title: Diesel Pro Status: Not Here Join Date: Apr 2006 Member`s Gallery Posts: 1,519	1000+ hp and it can only muster a 10.6 quarter??? Trucks with 1000rwhp diesels do that and weigh twice as much. What gives? Stock tires? Chitty driver? C-ya __________________ Mitch 02 Chevy 2500HD EC SB 4wd D/A, MA SCIII, 4" exh, SD Ported Turbo Inlet 83 GMC K30 CC SB 4WD pull truck awaiting LBZ DMax/ZF6 conversion Forsale: 06 2wd 6spd Alli SALE PENDING

04-15-2009, 09:22 AM	#15
Dalpilot Name: Dalpilot Title: Joe Nobody! Status: Not Here Join Date: Apr 2006 Location: Austin, Texas Member`s Gallery Posts: 10,379	It was a beautiful setup. Said he paid an extra 30K for the turbo setup.

04-15-2009, 09:36 AM	#16
riversidediesel Name: riversidediesel Title: Grease Monkey Status: Not Here Join Date: Jun 2007 Location: Sealy, TX Member`s Gallery Posts: 175	I found a receipt in the second GT that they brought for an alignment, the price tag for the twin install was $45K

Advertisement

Want to advertise?