Short shock number

zstroken

zstroken

For $$$ your name here
Joined
Sep 27, 2006
Messages
23,151
What ist he part number for the shocks that you use if you take the shock tower out and replace it with a flat piece?
 
I had a Rancho book before. I just went through and found a size that seemed to be good. I inverted the tower slightly on mine.
 
We made flat plates for some around here and just took the shock to the parts counter with the instructions to find us one that was 4" shorter. On my truck that has a small lift on it we didn't need to change the shock at all.
 
I just stuffed the stock shock down and put the plate on. Truck did have 2 inch spacers on top of springs.....

BigYellow

If you want more room for tiwns,BIG singles,other "stuff" on a pulling truck you can cut the inner fender out completely and make a new one that is flat at the hieght of the shock mount from the headlight to the firewall.

IKE
 
You must log in or register to reply here.
Top