1995 Dodge 2500 Part out

HazinHtown

HazinHtown

New member
Joined
Dec 17, 2009
Messages
235
This was my daily driven/project truck for the last year, and i totalled it the week of thanksgiving. Here are my craigslist ads. any questions can be asked either on here, through pm or you may call my cell phone 301-491-6300
Plans are to buy a 3rd gen once i get the motor, wheels/tires, and rear end sold. Prices are all OBO, nothing is completely set in stone.

**5 Speed tranny/transfer case, front/rear driveshafts, manual pedals are already sold. and i am keeping the green traction bars for my next truck. Thank you



Cummins 12 Valve Built Motor Complete (auto parts) -Motor

Dodge Cummins Turbo Hx-Super 52 w/ 4''downpipe (auto parts) -Turbo/downpipe

Dana 60/Dana 80, dodge cummins axles (auto parts) - Front and rear axles

Pickup wheels 8 lug 35x12.50's (auto parts) -wheels/tires

Complete Part out 1995 Dodge Ram 2500 (auto parts) -other random parts


bars2.jpg

dragstrip3.jpg

IMG_3762.jpg

IMG_3920.jpg

IMG_3925.jpg

IMG_3933.jpg

IMG_3938.jpg
 
I need the drivers side cubby for the door. Also, i need the power window switches/power door locks for driver and passenger sides. Can you shoot me a price.
 
9512valve said:
are you selling the trans and transfer case id need everything to do a 5speed conv.
Click to expand...

As of right now, im waiting on a buddy to get me the money for the 5 speed swap...if something is to fall through with that i will get you a price.
 
cleansilver.01 said:
how much u asking for the turbo and how many miles is on it
Click to expand...

Just the turbo, id take 750obo and it has about 4k of my miles on it, and i bought it used off of a local puller who used it at 3 pulling events and then sold it to me. next to no shaft play, brand new hotside housing (when i bought it) and the adapter to mate it to the stock manifold if need be.
 
Cursedtofirst45 said:
I need the drivers side cubby for the door. Also, i need the power window switches/power door locks for driver and passenger sides. Can you shoot me a price.
Click to expand...

Drivers door was trashed, as for the plastic on the inside as well..and it was a base model so no power anything on the doors...sorry i couldnt help you out man. I have a good passenger door but no electronic parts to go with
 
Chimney said:
How much for the stack?
Click to expand...

Stack is sold...

If you are interested in something similar, i had it made cheaper than you can buy any "chrome" stack from a company...

I talked to a local metal worker, who rolled me a 10 inch cylinder of steel, the height i wanted, and welded it up the back. cut an angle on the top of it for the mitre, and welded a square plate on the bottom of it...with a 5inch hold in the plate for the 90* elbow to come up into the bottom of the stack through the bed. Put the same size square plate on the 90*elbow for the bottom side of the bed, and drill four holes in each corner of both plates and through the bed...and tighten it up with four bolts...then you have a sturdy stack mount, a 10 inch stack, and mine cost me 110 bucks. Throw some high temp paint on it and your set.....

Oh, and if you do get your own made, it would be a good idea to do what i did and get a piece of "grill" like material, and weld in the inside of the stack, just below the mitre....so that any "funny friends" cant throw random objects down your stack.

Here's a pic before it was painted...
stack.jpg
 
Last edited:
Thanks for the idea man. Sucks to hear about you truck, that was a sharp one.
 
no prob. it does suck for sure, i had a decent amount of time and money in it...but it happens...time for a new project.
 
You must log in or register to reply here.
Back
Top