Forced Inductions S467.7mm For Sale

NickTF

NickTF

Single turbo turd.
Joined
Jun 4, 2007
Messages
5,887
I'm letting go the current S467.7mm Forced Inductions charger. It has around 1000 miles on the new compressor wheel and around 1500 miles on the charger itself (compressor ate some debris which is why it was changed). The turbine side is 74/83mm and a .90 t4 hot side. The compressor cover is a racecover which is the same cover Bullseye uses with a bell mouth inlet. It is tapped for an 1/8th npt boost fitting. Turbo is tight as can be.

It is rated at 940hp (94lbs/min) on Forced Inductions web site. I will let it go for $900 and shipping. The pics below are of when I first got it. I can get more recent pics just don't have any handy currently.

DSC_0006.jpg


DSC_0005.jpg
 
Sorry for the lack of knowledge....what's a std s400 flange size? I bet I could get a different cover. Maybe I could get the housing machined?
 
huntduck said:
Sorry for the lack of knowledge....what's a std s400 flange size? I bet I could get a different cover. Maybe I could get the housing machined?
Click to expand...
You could get the ex. housing machined to accept an hx40 dp or you could just buy a flange to weld on to your downpipe that would work with this turbo
 
ctdiesel99 said:
You could get the ex. housing machined to accept an hx40 dp or you could just buy a flange to weld on to your downpipe that would work with this turbo
Click to expand...

This is correct. I was told by forced machining the s400 flange to hx40 dimensions is not advisable. I welded on the s400 flange on to my down pipe.
 
nike said:
What about the elbow?
Click to expand...

I use a standard issue s400 v-band elbow from cummins. PM Snedge for pricing they are not expensive. Forced may be able to get them for you as well.
 
I'm very interested in it. I Think it would work good on my 6.7 cummins.
 
Just be patient with me. Gotta convince the wife this is a must have!! But if someone comes up with the cash before me I understand.
 
Last edited:
I'm trying. I really want the billet wheel for this thing too......

P.S. targeted truck is a 6.7 as well
 
nike said:
I'm trying. I really want the billet wheel for this thing too......

P.S. targeted truck is a 6.7 as well
Click to expand...

Is your 6.7 getting a head gasket by chance? I know I saw your user name elsewhere. CF maybe?
 
You must log in or register to reply here.
Back
Top