Bob Wagner
Comp Diesel Sponsor
- Joined
- Jun 26, 2006
- Messages
- 2,750
you called?
Time will tell, im waiting to see if any issue's arive from that combination.
unless it's an inferior cam which I'm sure it's not... I doubt there will be issue with that combo. I asked Hamilton the same thing and he agrees, there wouldn't be a problem.
It's the combo I have now and the truck is purring right along.
Great to here it's running....Pm details....If your not posting results
As far as the cam/spring combo, I'd probably still do New tappets just to make sure....
Anybody know what tappets cost from Cummins??
I know of a few running that combo, lifters arn't to much money but are fun changing them out. I would think your stock ones would be fine with fairly low miles on them.
In my opinion the tappets MUST be chaged there is a wear pattern started with in 10 min of run time! I know they are pita to change but i know that even if i had a bran new motor from cummins that had only been ran for quality checks I would still change the tappets!
It's settled then...New tappets are gonna go in.....Since the whole thing will be apart, I'd be stupid not too..
Btw, Is there anything else I should replace besides the cam, tappets, etc..?
It's settled then...New tappets are gonna go in.....Since the whole thing will be apart, I'd be stupid not too..
Btw, Is there anything else I should replace besides the cam, tappets, etc..?