Recent content by 1997-12

Looking for the stock flange that clamps on to an hx35 for a 2nd gen.

I have a 12v block that is standard bore, standard bearings, block is cut for fire rings, tapped for 14mm head studs, and 14mm main studs, it will also come with a crank. $750 cyl head has been ported and polished, the intake is milled off will not come with valves or springs. $500 Airdog 250...

complete drop in engine engine is all new lower end balanced, block was bored .040 over and decked new decked cyl head from cummins, mahle pistions part #286050-040, flycut .100, new hamilton cam 200/220, new oil pump, all gaskets and bearings from cummins, pump is a 12mm 215 pump with 4000gsk...

engineered diesel turbo has a total of three pulls on it Schied/TS legal billet wheels, exhaust 87mm, 1.10 ar. compressor 75mm clipped 2.6cover $2000 shipped

12 valve block is set up for 14mm main studs and head studs standard boar firerings are cut in the block also crand and main caps included. 12valve head has been ported and polished set up for 14mm head studs, intake has been cut off for runner intake, it has had a valve job valves included...

I have finally decided to sell my toy truck, need the money to build a shop, the truck is a 1997/2500 RCLB 12 valve, two tone blue and grey, 165,766 miles 5 speed. The truck used to be a dedicated 2.6 truck last year then i melted a hole, so i turned it into a truck that i could throw some fuel...

im looking for a 4x4 shifter/linkage assy. out of a 98.5-02 let me know what you have please

I have decided that i am going to get out of pulling all thes parts off of a 12 valve, everything listed has 3 pulls on it. Prices do not inclued shipping. northeast diesel 13mm pump auto gov. set at 5500rpm, 575cc pined @18 degrees, just flowed and tested by kevin 2 weeks ago. $3000...

Im looking for a factory intercooler for a second gen, intercooler pipes and the 4 boots if anyone has anything let me know please.

I installed a new Hamilton cam last week and went to test it out this weekend, truck has a miss, low power and just doesnt sound right above 4000rpm, I didn't degree the cam in after talking with the guys a hamiliton they said to just set the cam to stock. i double checked the valves and broke...

i have gt4294 journal bearing garrett turbo for sale. Has 15 pulls on it. It has a clipped wheel with 1/8 protrusion all work was done at columbus diesel. $1100 shipped

have a helix h2 cam out of a 12v, has the cam gear still on it, arround 6,000-8,000 on it. $375+ the ride

Looking for an ats t4 manifold for a 12valve.

Im looking for a 12 valve block that is already line bored and bushings or bearings installed in the cam journals to run a billet camshaft. let me know what you have.

I am selling an airdog 150 for a buddy of mine, it has been on the truck for arround a year, it is the complete kit, we removed it because he is selling the truck, will fit years 03-07 6.0 trucks, it will come with pump, filters, wiring harness, fuel line, all fittings, mounting brackets, and...