Looking into buying a set of cut tires to put a 3.6 truck together, is there a significant difference between the various offset Real Wheels? And does the offset provide an advantage? And are beadlocks a must? Thanks
Looking for an oil filter housing for my vp truck. Stripped the threads where the feed line for turbo comes out.
Also in need of a good p7100 for my 95. Mine had 4k gov springs in it: if some one has one with this set up that would be nice but if not I'll decide if I'm going to switch before...
Looking for the v-band clamp connected elbow that goes from pressure side of turbo to the intercooler pipes. Please let me know what you have and shipping would be to 44266. Thanks
2012 Ram 3500 true Blue paint. Truck has 8200 original miles. Truck has been garaged during the winters and has never seen salt. Truck is clean, inside and out. Has south bend double disc clutch already installed. This and the deletes were done at 5500 miles, so they are all like new. Gooseneck...
I'm looking for the factory elbow on the back of the hx-35 that the downpipe bolts to. Still have a good turbo but the guy that had truck before me made his own twin setup and now the Lenox is missing from the hx-35. Thanks
6.7 block bored to 4.25"
Filled block
Double keyed crank
Fluidampner
England rods shot peened and polished
Arp main studs
Ross pistons coated top and skirts
Valve reliefs cut
Cam bushings thru block
Motor sports supply billet cam
Arp625 new age head studs
6.7 Zz custom fab individual runner...
6.7 block bored to 4.25"
Filled block
Double keyed crank
Fluidampner
England rods shot peened and polished
Girdle
Arp main studs
Ross pistons coated top and skirts
Valve reliefs cut
Cam bushings thru block
billet cam from Greg Houge
Arp625 new age head studs
6.7 Zz custom fab individual runner...
6.7 block bored to 4.25"
Filled block
Double keyed crank
Fluidampner
England rods shot peened and polished
Girdle
Arp main studs
Ross pistons coated top and skirts
Valve reliefs cut
Cam bushings thru block
Motor sports supply billet cam
Arp625 new age head studs
6.7 Zz custom fab individual...
i bought my valve body from you guys and it lost the tune for some reason and now the truck will not move. I have attempted calling numerous times and had no luck in getting in touch with the tuner for these valve bodies. Any help would be greatly appreciated as there is a local pull in a few...
I have a 48re trans with the suncoast standalone valvebody in it. The trans was installed a couple weeks ago, and ran great. then after driving for a week, the volve body some how lost the tune in it. Does anyone have one of these valve bodies in their trucks and can you send me your file so I...