Recent content by ice.v8

hello everyone, how can i know if the cp3 (stock) is supporting good my injectors with 90hp nozzles ? i have a rail pressure gauge, what number does i have to see ? light throttle, medium and full throttle ? also at full throttle the numbers on the gauge have to go up fast or they raise slow ...

I have to say thanks to Jeff for coming here in italy helping with my tranny... i had a lot of trouble with it and no one here can help me... Jeff was so kind to solve all my trouble and do an awesome job... i love his tranny, and i love how the cummins is now shifting... Thanks Jeff and Amy to...

I used again the cummins after 9 months it sits down for the tranny broken.... the problem now is that it has a really bad vibration while breaking... i also feel it on the brake pedal which seem to pulse... the story is i broke the tranny in october and then i never used it, so it stays 9...

I installed the tranny yesterday but i begin to hate myself... i rebuilt it as spec with all billet parts and update... i have two problems and now i don't know what to do... i double check everything two times... but now i have these problems: - no shift in overdrive - strange 2-3 shift... the...

i need 5 forward (rear) clutches for a 47re... .061" thickness, 62 internal tooth... raybestos hi energy or borgwarner would be ok... let me know...

I have two questions about a shift kit installation... it is from DTT... - what is the function of this groove to cut ? and also does someone has a pic of this groove ? cause i don't know how to cut it... deep not deep, large, etc... - what is the function of this notch ? i saw a lot of...

will the 6 pinion rear planetary from a 48re works in a 47re ? if not i found a 6 pinion aluminium aftermarket planetary that will work, is a good upgrade from the stock 4 pinion ?

i welded the forward clutches in a boost launch, i removed and open the tranny yesterday and there is a lot of clutch material everywhere... i will clean up all the things and put in new forward clutches and steels for sure... the question is, does i have to change also the other clutches ...

hi guys, i welded my forward clutches in a boost launch... tomorrow i will remove the tranny again and clean it all... as i have to change all the clutches while i'm there, what do you suggest to use ? i have the dtt billet piston in the direct drum so i have 5 clutches instead of four there...

hello guys, i need to know if the turbine wheel and shaft from an he351vgt could works on an he351cw or if they are different part number... the one from he351cw is 4035271 but i can't find part number for the vgt... please help...

does someone have one of this ? new or used in good shape... thanks

Hi guys, i found here in italy new bosch nozzles for our 2003 and 2004 commonrail at very low price... 62 dollars each one... so 372 dollars a set... no core needed... they are brand new and not stock honed... the question is... 30% will be something like 75hp ? and 60% ??? with the setup i'm...

hi guys, with a leveling kit of 2 inch or maybe 2.5 inch are all 4 control arms neede or only the 2 lower ? and 1/2 inch longer are ok ? if i need all 4 control arms, do they have to be all 4 1/2 inch longer or the upper need different lenght then lower ? thanks.

Hi guys, it’s some days the tranny has a problem… It was working good and i only have around 1500 miles on it since i rebuild it with all billet parts from dtt, shift kit, and all the goodies… Now it’s some days that sometimes when it’s time to do the 2-3 shift, engine revs up free for less...

hello i need: - 47re deep pan (ats, mag hytec, etc) - mp8 for 2003 - arson III or something similar for the cp3 thanks