Recent content by jpowel29

T3 Exhaust Housing (.85 A/R) Fits ATS 5000 turbine (83/77 I believe) Nice Shape $125

Set of 4 Raceline Shift - 16 x 8 - black 8 lug wheels with center caps and chrome lugs and Hoosier DOT Drag Radials - DR2 series - 295/50/16 Only two races on this set-up. All in perfect condition $1200 plus shipping - everything is banded/shrinked wrapped on a pallet ready to quote and ship...

PTE compressor wheel (65mm x 108mm) - cut down from 80mm inducer 2618 forged alloy Threaded through bore (approximately 8mm) Never ran $300

Red Prothane Body/Cab Mounting Bushing Set - used in very nice condition PN 7-141 - fits 99 thru 2014 Silverado/Sierra 2500 4wd and 2wd - all cab configurations May also fit others as well - check Prothane website/catalog to verify correct PN for your application No mounting bolts included $70...

Complete set of 12v connecting rods Have been cleaned, checked for size, and cryo treated Brazil castings - great shape $250

Good Used Cam Gear - fits 2001-2004 LB7 and these make a nice replacement for the two piece cam gears used in LBZ. $50

12mm P Pump Core 0 403 736 867 - looks to be 275HP pump off 8.3L RQV400 gov Missing a few pieces - shown in pics $200

Looking for a 5.7 GM/Olds diesel block (1979 - 1985) D or DX blocks Prefer .842 lifter bore but the .921 lifter bore blocks will work as well No heavy rust or pitting I will pay for freight and can do Paypal

Garrett GT4202 Journal Bearing Turbo - fresh rebuild (zero miles on it since) Compressor Specs: 74.3mm inducer (cast Garrett wheel) 102mm exducer (53 trim) 5" compressor 3" vband oulet Based on Garrett's map it flows around 95lbs/min Turbine Specs: 82mm Garrett turbine (84 trim) 4" vband...

BD Billet Flexplate PN 1041210 - still like new with very little run time $300

Set of 4 wheels and tires currently on my 2006 CCSB DMax Mickey Thompson Classic Wheels: 17 x 9 - 8 x 6.5" - 5" backspacing with 3250lb load capacity per wheel. Black Mickey Thompson center caps and chrome lugs included. Wheels are in great shape (stored inside during the summer/racing months)...

Parting out a selection of like new aftermarket/replacement parts. All were bought new and have less than 1000 street miles of use. Borgeson/Delphi Dodge Heavy Duty Steering Box - Bought New (not a reman gearbox or internals). Has new MasterPro high pressure hose and new pitman arm installed...

Set of four Truxus STS bias ply tires - 33x13.5x16 Excellent shape - tread depth still shows near full depth 19/32 Only 2-3 test hooks on this set and zero street miles (stored inside out of the sun) One sidewall has surface nicks (shown in pics) but did not penetrate in $800 for the set

Aeromotive 2 port Fuel Pressure Regulator - PN 13212 Excellent Condition - Very little use $150 shipped Features: Adjustable from 2-20 PSI. Bypass design provides the ultimate, dynamic fuel delivery system. (Requires AN-10 return line) Fuel pressure rises on a 1:1 ratio when referencing boost...

Good used 12v Runner Intake - I believe this one was made by a CompD member (Big Yellow Iron IIRC) Good used condition - $400 plus shipping