Recent content by MOcum

This is a cam that I ran for 3 months. Tore my truck down in the spring to find that the cam had slight scratches on 2 of the lobes. Its nothing major, but it shouldnt have happened so soon. Tried contacting Greg Hogue and he wouldnt reply to a PM or answer the phone..so now this cam has been...

All prices are shipped. If using PayPal, add the percentage they charge since im paying the shipping. Glacier Diesel fuel pump, bracket, and belt $150 2005 CR head. Ported & Polished, fresh valve job, decked, oringed .015. $1200 Balanced 05 CR pistons. $400 Balanced Mexico VP rods. $350...

Had these made for a drag truck project thinking I would use a D80..Now I'm going with a 5 lug rear and don't need these wheels. They are standard 8 lug pattern. Taken out of the box to mount the slicks and then taken right back off so they're basically new Ive got $1200 in them and will be...

Forced Inductions 94mm charger with a 1.1 ar. 800 miles on this turbo, $2000 Silver compound piping from my 05 built by MPI. Has a 44mm Tial gate, top charger was 300 based, bottom was the turbo listed above. $1000 Would take 2800 if those 2 items were purchased together. Also have a t3...

I have 2 CP3's for sale, The first has 12k miles and I would like to get 400 out of it, and the other has about 95k miles on it, I would like to see 275 out of it. Both pumps came off of 05's

4k miles on them, just had them tested with a set of injectors and everything checked out fine. 80k miles on the injectors, never had any type of pressure box ran with them. 1100 for the injectors and 550 for the tips. Prices include shipping

I have a set of 12v and 24v rods, I have decided to send the 24v rods off to have them shot peened to put in my 05. Anyone have feedback or a place to send the rods to?

Ok guys, my current build should put me right around the 1k mark on fuel and I also have nitrous on tap but will not be playing with it until i can further build the bottom end. I had it in my head that I would freshen the tranny each winter, but now I've heard otherwise. My truck is a 05 and...

Picking up the materials for my cage today and was curious how everyone else has theirs built. NHRA says that any vehicle with a OEM frame must have the cage attached directly to the frame, that seems like itd be a bit tougher to do than bolting it to the floor. Also, the bar that comes past...

Got my truck back together last week with the big twins, head work, and we o ringed it 0.015 while it was at the machine shop. Had it back together for 3 days and the first time I hit 65lbs it blew the gasket out of the front of the motor and was pouring oil out. Im running the 0.010 over...

This is the Pulse Flow 2 piece exhaust manifold for a 3rd gen cummins. It is in great shape and it worked well for me. I am located in SW missouri and am looking to get 275 shipped. Thanks