I've installed a new cummins engine and replaced my v10. After several hours of hair pulling I've got the truck running after replacing pcm with a 2001 the ecm and engine harness including the harness/fuse Box under hoodwiring are from a 2000. I do not have power to run the alternator unless I...
I need good cummins engine harness trying to get a new engine running but not getting proper signals and suspect the harness. Let me know what you have thanks.
http://columbus.craigslist.org/pts/4319552112.html
Here is the link with info. I have removed them from the truck and could bring them to the Dekalb pull if interested. I have not weighed them yet but would rather not ship.
$450.00. They're from a 2nd gen truck.
monster pump with about 2000 miles works very good was removed for p-pump swap 1700.00 plus shipping OBO
hurricane 2 injectors with these injectors easily cab able of 500 HP to the ground
with a good turbo and no boxes.
600.00 OBO for the injectors
these injectors have been compared to ddp 250s...
96 regular cab long bed was 12valve 5 speed (( engine and trans has been removed)). They were removed for trans swap and engine was sold
It has a dana 80 rear diff and dana 60 front diff have clean MASS title in hand
front diff appears to have an air locker (has hose going into diff housing and...
I have 4 trxus that have approx 15/32 tread left 2 are slightly rounded on edges 2 still have sharp edges they do not have any road miles only pulling/offroad miles
Looking to get $750.00 for them no longer need changing brands.
http://i1197.photobucket.com/albums/aa426/nycetrk/20120604_194932.jpg
I have a complete transmission with suncoast rebuild kit suncoast valve
body suncoast billet input shaft. has approx. 20k miles since rebuild has had several pulls and a few dyno runs since installed but still works great.
just installed ats 2800 stall converter it has 4 hooks on it and works...
Ive got a used dana 80 with 410 gears and welded carrier.
unknown mileage but has about 30miles and 10 hooks since installed in my truck.This diff is a single rear wheel axel and is out of a 97 dodge.
Asking 800.00 would rather not ship. Diff is out of truck and ready to go.
This is a used eep cam that comes with gear and tappets.
Its a drop in and in good condition was in a 24 valve 2000 model.
Just measured and its is 304/181 intake 304/210 exhaust.
asking $500.00 plus shipping.
Mobile Photobucket
Mobile Photobucket
Mobile Photobucket
Ive got a good used 12mm p-pump with full cut delivery valves but stock holders and quick rate cam did not get a flow sheet when purchased but never had any issues.
has 5k springs and was ran with an auto trans.
Has custom fuel plate and afc housing has been set to start fueling at 15psi and be...
Coolant bypass system and 3 bolt in freeze plugs. All are used but are good condition.
Will include upper radiator hose but will need 3/4 hose to rear plug. $250.00 shipped.
Can text or e-mail pics.