Recent content by regcanfan

Have the retorqued head bolts been as successful on a VP truck as the 12v's?

If you pee pump it can you make a lope tune for it too :ROFLMAO: . That's where I'm coming from, spend the money on some better matched hard parts and keep the tuning box simple and have it run just as good.

Thanks. Which the smarty wouldn't have a wire tap. That's what I was getting at, have some larger hard parts and go lesser on the tuning. Stock turbo?

Did you ever install your quadzillia? I was thinking you picked one up.

Messaged Weston back and forth a few times. He suggested putting in a bigger turbo, then bigger injectors than 50-75hp. So, that got me to thinking if you were to put in a good set of 150s and a modified drop in hx35 with just a mild box like edge ez without the wire tap would it run good or...

Looking for some injectors, nothing to big or crazy. RV275 or possibly a little bigger than that. I want to possibly go up to a he351 or a modified hx35. Does Weston mess with the smaller stuff? If not wondering about a set of Flux Injectors. Happy for thoughts or suggestions.

Flashing a 2017 ram with a stock file. Got a file off the library that matches E/C number, so the os number is the same. Do I have to put a vin into the file or will it flash in without one? Using a V2 and going to flash in pass through mode. Thanks

More curious than anything, but I was wondering what guys are using for benchflashing tools. I had come across the Aleintech tool that can flash through the obo port, on the bench, and in boot mode. It was advertised to be able to flash the newer powerstoke ecms. I wasn't able to find out...

Like the title says looking for an L5P ecm. Odd request but preferably stock (not unlocked). Also going to be picky, but has to have all the tabs for the connectors and plastic connection ports need to be in good shape. Kind of a long shot but thought I would try. Also if anyone has any...

We've got a 2012 freightliner with the isl in it. Turbo actuator is starting to act up. I didn't know if we could get away with just replacing the actuator. If not, is a rebuilt turbo + new actuator an option or just go with all new. I suppose availability plays into it as well. Turbo has...

Not sure if this interests anyone. I noticed a sale flier hanging up in the parts store this morning. I'll copy the link for the auction. A few machines for sale and a bunch of cores it looks like. I think the owner passed away and his wife kept it going for a few years. I'm guessing the...

Looking for mirror glass and the rubber that goes around the glass and hold it in the mirror. The mirror is on my 97 dodge 3500. It's the big ugly mirrors bolted on the door. Having a hard time trying to find on with the glass and rubber. I'll attach a picture of the mirror so you know which...

1997 dually 2wd (cab and chassis so solid front axle) automatic. 136k miles Crank windows Dash has one small crack Zero rust Good paint, no peeling Flatbed with ball and trailer hookups and brakes Engine: Rebuilt with balanced bottom end 60lbs springs .20 over otherwise stock rebuild...

Kind of a long shot but wondering if there are any 12 valve motors hanging around. Looking for a p pump motor. Would be nice to find one that I could just drop in. That's probably getting pretty rare to find any more. I'm in central Nebraska.

Looking to clean up the shop and organize some of the tools better. Looking for a rolling tool box set up. I dont know much about them. I know there is different levels within a brand. The local carquest carries the international brand which seems fairly reasonable in price. I've looked at...