2.5 suspension help

[Burningtire]

Pushing back.

 

[ComnRailPwr]

Pulling forward is a bad thing, caused immediate hop when I did it a few years back.

 

[Shawdrainage]

Tight pushing back or pulling forward?

Pushing back

 

[99GreenCummins]

Pulling forward is a bad thing, caused immediate hop when I did it a few years back.

I thought so, figured I'd make sure though.

 

[Got Milk?]

Don't weld the large hole that is shown in the pic. That hole is for a case spreader so you can set proper bearing preload when changing gears

 

[Lincoln_Diesel]

Can people post where and how you mounted up your weight brackets? I mounted mine to the front cross member by myself real fast before a pull and long story short it got bent from the weight... I just wanna know a better way to weld it in and all that. The traction bars follow the line of the drive shaft coming to about the ex cab door. We are using a regular reese hitch. Did a solid drive shaft also. We will take off the leveling kit. Then the only suspension work I have is we took some box tubing and flat plate and welded them from frame to the bump stop leaving 1" of travel thinking that's what we were required..

 

[1pieceatatime.]

Don't weld the large hole that is shown in the pic. That hole is for a case spreader so you can set proper bearing preload when changing gears

But that picture is out of a magazine, its gotta be legit :hehe: