Any Hummer Cummins swap guys in here?

my69camaro1

New member
Joined
Mar 7, 2013
Messages
22
I have a 1990 M998 Military hummer with a junk 6.2L that I'm currently pulling out. I have a 1996 215hp P-Pumped 12v sitting on an engine stand pulled from one of my old rebuilt title trucks I parted out. Just picked up a 1994 47RH transmission. And I'm on the look out for a NP241 DLD t case.

I know the swap has been done but all I can find online are old threads with less than stellar pics or missing pics.

I need ideas on motor mounts, transmission mounts, and spacing to get everything to work.:lolly:


End goal is a somewhat stock looking, light armor slant back with slightly larger tires, a motor that makes twice the power as a stock unit, and an overdrive trans.
 
send a PM to supersonic on here, I think he is working on a 12 valve into a Hummer conversion.
 
Maybe you can make it do more than 45. LOL good luck.

And make a thread so we can see!
 
Yeah I hope it will safely cruise at 65mph when done. Ha

See if I can figure how to post pics. I'm not seeing anything show up in Preview Post.

[ame="http://s1314.photobucket.com/user/my69camaro1/media/Mobile%20Uploads/IMG_20150616_103306_010_zps0a78333f.jpg.html"]IMG_20150616_103306_010_zps0a78333f.jpg Photo by my69camaro1 | Photobucket[/ame]

[ame="http://s1314.photobucket.com/user/my69camaro1/media/Mobile%20Uploads/IMG_20150622_170212_110_zps5d46176b.jpg.html"]IMG_20150622_170212_110_zps5d46176b.jpg Photo by my69camaro1 | Photobucket[/ame]

[ame="http://s1314.photobucket.com/user/my69camaro1/media/Mobile%20Uploads/IMG_20150712_174538_637_zps5a5d5126.jpg.html"]IMG_20150712_174538_637_zps5a5d5126.jpg Photo by my69camaro1 | Photobucket[/ame]

[ame="http://s1314.photobucket.com/user/my69camaro1/media/Mobile%20Uploads/IMG_20150704_164908_280_zpshpk6kwqc.jpg.html"]IMG_20150704_164908_280_zpshpk6kwqc.jpg Photo by my69camaro1 | Photobucket[/ame]
 
Last edited:
Like this?

IMG_20150616_103306_010_zps0a78333f.jpg


IMG_20150622_170212_110_zps5d46176b.jpg


IMG_20150712_174538_637_zps5a5d5126.jpg


IMG_20150704_164908_280_zpshpk6kwqc.jpg
 
Yeah what am I doing wrong. Same links I copy for ar15 and steelsoldiers sites.

Copy the direct link in crapbucket, then when posting here select the picture icon above and past the direct link there. Looking forward to seeing your project progress.
 
I always thought the two door pickup versions were bad ass. Good luck with the swap.
 
Sweet! Are you going to be keeping the CTIS too? That's probably my favorite part of those.

Any idea on how much torque those CVs and hubs can handle?
 
Sweet! Are you going to be keeping the CTIS too? That's probably my favorite part of those.

Any idea on how much torque those CVs and hubs can handle?

Mil versions to my knowledge don't have the CTIS. Which is fine with me, if its anything like the m35a3s it rarely ever works. The stock shafts are on the weak side but upgrading to the 12k shafts is pretty easy. From the looks of it the geared hubs are extremely strong.
 
Not sure if they sell parts, but they sure do a lot of H1 Dmax's and cummins swaps.

http://predatorinc.com/predator-cummins-conversion-new/


I've sent a few messages for motor mounts but have heard nothing. I have found them and big dog offroad, they sell kits for the DIY type. But OMG the prices are well past my poor white boy funds. Big dog wants 20g for the DIY kit, that's without motor, trans, tcase. No thanks I'll do it myself. :lolly:
 
Back
Top