Arp 2000 and 0 rings please advise

STROKETHISF350

STROKETHISF350

New member
Joined
Sep 1, 2012
Messages
1,253
Well it's time for new injectors sooner than I thought and I only want to do them once so I'm going to go with 100% overs. With that being said I am going to be running a stock/s475 twin kit and a Hamilton 188/220 cam and I will need to go over the head before I make any of these modifications. The plan is to have the head checked, decked and o-rings along with oversized high nickel valve seats pressed in along with valve springs. My question is will the normal arp 2000 head studs be sufficient for my build considering I'm going to be running o rings? I wanted to run the a1 h11 studs but they are currently on back order. Any input is appreciated.


Sent from my iPhone using Tapatalk
 
They will be fine. Follow the proper sequence and do all your Retorques before you apply full power.
 
Thanks bud I ordered the 425s what do you recommend for a final torque I know arp says 125


Sent from my iPhone using Tapatalk
 
You must log in or register to reply here.
Back
Top