BD tow primary turbo

J

Jehri

New member
I have a spare BD tow primary (S300S) non gated & was wandering if I could put it on a 04 Cummins & make it work, other than needing a t3-t4 adapter I think all would be good. The 04 has a BD Super B on it now.
Will it work?
 
the tow primary is a 66/74/1.0 s it not ?


a non gated "silverbullet", it should work... most guys run them with a .91 housing
 
I believe this a 64-71-14, not sure of the ar.
I just would like to get some use out of it.
Thanks, sounds good so far!
 
If you can get it bolted up with an adapter, that size charger would be tits on a CR 5.9.

But is that primary a non W/G housing?
 
Yes it is a non w/g turbo, that was the 1 thing I was worried about.
I just want to make sure it will work before spending money on an adapter.
I looked up the part #, but can't find to much on it. (175516)
& yes, I like tits to, but pussies are good to.
 
Last edited:
Oh, I see what you did there...I like your style.


But non W/G is ok, just talk to Taylor (Tmoneydiesel here) and get a T4 Steed with an External W/G. Done.
 
Last edited:
The guy does not want to spend the money on a new manifold. What would be, if any, the consequences of running it with no waste gate?
I just hate seeing this thing not being used, maybe I will just sell it, it's only got 3-4k on it.
 
it's a 66/73 with a 0.91 T4 exhaust housing on it.

I ran one with 5x14's, 131 dv's and it pushed 45-47psi boost with no wastegate.... more fuel and air from a CR would definitely put that thing in the 50's.

4541499077_3ab2008198.jpg
 
Good info, We are going to go for it, it's a Engineer's truck, got to find some down time, oil rig's are busy here.
Thank you.
 
You must log in or register to reply here.
Back
Top