RonA Active member Joined Feb 26, 2008 Messages 11,068 Nov 12, 2009 #1 I'm going to have cam bearings installed in the new block and put my only slightly used Spartan billet in. Should I just drop down to about 1/2 the zinc level, or keep it at 1/2 bottle per change(every 1500 miles).
I'm going to have cam bearings installed in the new block and put my only slightly used Spartan billet in. Should I just drop down to about 1/2 the zinc level, or keep it at 1/2 bottle per change(every 1500 miles).
Big Swole MegaInterceptor Joined Jun 28, 2007 Messages 16,950 Nov 13, 2009 #2 I'll be running Don's Spartan Cam set too....Good question... ??
Soup Nazi The artist formerly known as Don M Joined Sep 26, 2006 Messages 1,197 Nov 16, 2009 #3 One of thing you probaby already know: Keep the tappets in order so they go back on the same cam lobe. ZDDP levels are crazy high in our additive so 1/3 bottle is plenty for a bare block and the Spartan after break-in. Which you already did. With cam bearings you can use 1/4 bottle. Giving you four changes per bottle of additive.
One of thing you probaby already know: Keep the tappets in order so they go back on the same cam lobe. ZDDP levels are crazy high in our additive so 1/3 bottle is plenty for a bare block and the Spartan after break-in. Which you already did. With cam bearings you can use 1/4 bottle. Giving you four changes per bottle of additive.