First time on the dyno 712 hp

halfton12valve

halfton12valve

New member
Joined
Jul 20, 2008
Messages
232
Today i finally had the chance to go to a dyno near my place with the 06 in my signature, it was a MD-AWD-500 Series i dunno if its a good dyno or not but it did 712hp/1400tq. to the rear wheels, thats the best i got on fuel only, am i in the lead with the following mods? i thought i would see at least 750 or more..

71/62 & s480 mpi twins
Flux 4's
Air dog 150
dual cp3 pumps
Helix 2 cam & ported head on the exhast side
TNT-R smarty & mp8 1/2 way up
Banks CAC
 
Settings on smarty were shift lim off, rpm high, timing default, rail pressure default, on sw 9
 
Use sw7 and pressure 2 with 25 % mp8....oh...tm 2...


What rail and lift pump pressure did you mantain last go around?
 
Use sw7 and pressure 2 with 25 % mp8....oh...tm 2...


What rail and lift pump pressure did you mantain last go around?
 
nice run-- not in the lead though.. sorry

i did 772 with 75% EXTRUDE HONE (150's) on regular tnt.

What were your rail #'s? Boost#'s? mp8 seems to work best inbetween 50-75% (100% loses hp on the dyno)
 
jsf350 said:
nice run-- not in the lead though.. sorry

i did 772 with 75% EXTRUDE HONE (150's) on regular tnt.

What were your rail #'s? Boost#'s? mp8 seems to work best inbetween 50-75% (100% loses hp on the dyno)
Click to expand...

wow thats pretty nice with 150's with what kinda tubos were that? fuel only?

I saw 25k rail press with mp8 all the way down and 55 lbs of boost max! That was at 5200ft so that kills some power & boost too..
 
cquestad said:
Use sw7 and pressure 2 with 25 % mp8....oh...tm 2...


What rail and lift pump pressure did you mantain last go around?
Click to expand...

rail was around 25k but i dont have a gauge for lift pump.. i used to use sw7 but truck surges like crazy on that tune..
 
halfton12valve said:
wow thats pretty nice with 150's with what kinda tubos were that? fuel only?

I saw 25k rail press with mp8 all the way down and 55 lbs of boost max! That was at 5200ft so that kills some power & boost too..
Click to expand...

mpi- 64/480- fuel only- boost 54 psi

What smarty # were you using? I always see the most on #9 -- everything else is ALWAYS lower hp
 
You must log in or register to reply here.
Back
Top