gladesauce7
New member
- Joined
- Apr 1, 2008
- Messages
- 119
I am rebuilding a transmission with a front band failure. It is going to have a goerend valve body and single disk tq. Anyways i pressure checked the front servo tonight with the extra spring in it (from goerend brothers) and the billet sonnax cover.. anyways on the back side of the servo there is a breather hole and when i pressurize the servo it is leaking out of this hole not much just a little. is the case worn to much or is this due to the extra spring tension? i wouldn't think its normal for any by pass here..