Gauge Install Help

[chriswelters]

Hey guys, I just ordered an SCT on Friday. I'm pretty excited about that. I also ordered 4 gauges and the 4 gauge pod and an intake elbow with the boost fitting. The problem is I'm a little worried about installing the gauges. I bought all auto meter gauges. Boost gauge full sweep 0-60psi, pyro full sweep 0-2000, oil pressure short sweep 0-100psi, and lastly the trans temp short sweep 100-250 deg. f. All the tips you guys can give me on the install would be great. How easy or hard each gauge install will be.

 

[nummit]

Install is very straight forward.
This is a good how to:

http://dieselmanor.com/diy/PSD3-gauge/PSD60gauge-p1.htm

 

[chriswelters]

Thanks that helps alot. Is there anything for oil pressure.

 

[chriswelters]

I was looking at djs website and i saw those oil filter caps with the tap in them. is that for hooking up your oil gauge to?

 

[Santa Gertrudis]

Yes, DJs caps can be used for that.

 

[Dalpilot]

Those are really nice caps too. I have oil and fuel.

 

[chriswelters]

If i didnt buy the cap is there any other place to put the oil pressure gauge.