Smoke'm
New member
- Joined
- Aug 27, 2017
- Messages
- 26
Hey guys I'm pretty new to the sled pulling world and I have a few clutch questions.
I have an 02 Dodge 2500 6 speed. I found a good deal on Southbend triple disc clutch that was behind a NV4500. He ran a bell housing spacer and a 1 3/8 input. If I'm not mistaken my NV5600 is stock with a 1 3/8 shaft but I'm wondering if I would have to run a spacer or is the NV5600 bell housing already deep enough.
Thanks in advance,
Paul
I have an 02 Dodge 2500 6 speed. I found a good deal on Southbend triple disc clutch that was behind a NV4500. He ran a bell housing spacer and a 1 3/8 input. If I'm not mistaken my NV5600 is stock with a 1 3/8 shaft but I'm wondering if I would have to run a spacer or is the NV5600 bell housing already deep enough.
Thanks in advance,
Paul