ppe high flow feed line kit? lift pump pressure?

[dirty_max]

i was wondering if any of you guys have used this ppe high flow feed line kit? i was wanting to put it on my truck but to eliminate the test port but what are you supposed to do about the return lines from the injectors going to that fuel block? or is it just a pass through? any positive input would be much appreciated. also i was wondering what kind of fuel pressure i should be running for an air dog lift pump. thanks

 

[JD4440]

What's done to the truck? It's a waste I'd say. I tried to put the inlet fitting on mine and it was too damn big for the OE hose.

 

[dirty_max]

i dont have anything to crazy done yet, but im just trying to get all my supporting mods done before i put a crazy tune on it. i figured the bigger fitting wouldnt work with the oe hose and thats why i wanted to just do the whole kit. someone was telling me that the inlet to the cp3 was pretty restrictive so i wanted to free it up a bit.

 

[JD4440]

It is, but if you replace the fitting the hole in the pump is still the same size IIRC

 

[dirty_max]

yea but i was under the impression that the fitting was the restriction.