what top charger to go with

[dmaxexpress]

k i have a 94 12v cummins with a airdog 150 180pump lc dvs 4 k springs 5 speed with 1 3/8 input and kennys dual disk clutch. im getting 5x18injectors my head done oring headgasket studs. k now my question is i am going to build a twin setup and do u guys think a s366 would do ok on top of a s480 or do u think i should go with a 64 .

 

[SuperiorRam]

Really

 

[YOUNG GUNS15]

What are you using it for?

 

[95-12valve]

What is your horse power goal? What do you do with the truck?

 

[dmaxexpress]

i want to be in the 700-800hp range. its a street truck

 

[dmaxexpress]

oh and any suggestions on a what cam to go with?

 

[OrangeNV]

i say 64

 

[dvst8r]

I say stock and a big external gate.

 

[MS_Hippi]

can you really push 800 hp worth of air thru a 54mm hole or was that pure sarcasm?

 

[dvst8r]

Well I know for certain that you can push 1100+ through a 62mm hole...

 

[MS_Hippi]

if it dont fit guess you could always just bypass the hole with nitrous

 

[95-12valve]

IMO you don't need a 66 over a 480 to make that much power, it can be had with much smaller and more economical chargers.

 

[dmaxexpress]

such as what kind of chargers. i know a lot of people run hx40 and a s475 or ht3b

 

[SuperiorRam]

Hx40 60mm hole just a FYI

 

[95-12valve]

such as what kind of chargers. i know a lot of people run hx40 and a s475 or ht3b

I'm running a 57mm S300G over a 75mm S400, once I get my new injectors in and dial in my timing, I'm expecting 700+ out of my setup.

 

[triton]

you saw what happen with my truck Phillip.... good luck :bang expectations can be disappointing.

 

[RonA]

For 700 to 800 range with good spoolup a 64/71/.8 over 75/83/1.1 will work well. It would be more like 700-750 range though. I'd suggest against the 480 for that powel level though. It's just not needed and will make it more sluggish.

 

[95-12valve]

you saw what happen with my truck Phillip.... good luck :bang expectations can be disappointing.

Yup, I've been paying close attention to every body else's stuff over the last year or so, made some really good connections, but I know what you're saying, things never seem to go as planned. Have you gotten all your boost leaks and stuff buttoned up? Your truck ran pretty good last night. Are you still running your same injectors you had with your silver bullet?

 

[MS_Hippi]

For 700 to 800 range with good spoolup a 64/71/.8 over 75/83/1.1 will work well. It would be more like 700-750 range though.

wasnt that one of the very first combos you ran ron....

dozens of sets ago?

 

[I C Smoke]

IMO Id run a 62 or something on the BW series of turbs.