I have a 98 12v that the previous owner swapped in a 5speed I have a Gauge issue not charging etc. I'm hunting for the issue now just want to rule out anything that would have needed to be done during the swap. The only thing that looks hacked in the harness is the solenoid for the fuel shut...
I picked up a 98 12v auto that has a manual swapped in and I don't have gauges ac or charging. Truck runs I've replaced the crank speed sensor checked all the fuses cleaned all the pins contacts and grounds I can find. When I hook it up to a scan tool it just reads error so it's not reading the...
Picked up a 98 12v originally an auto converted to 5speed. with an electrical problem. Truck will run just fine but no ac no gauges and won't charge.
I've replaced the alternator and crank speed sensor gone through all the fuses and cleaned all the grounds and pin connectors I can find. When I...
Getting farther along at my 1939 dodge conversion and want to look into some tire/wheel options. Factory tire size would have been. 19.5x8 with a traction tire dually. Id like to look as factory as possible with this rig. Im uaing a 96 dodge 2500 chassis. I think a 19.5 radial will be too stiff...
last year I built my rig its a 1939 dodge on a 1996 2wd cummins chassis Id like to convert to a dual wheel I can clear the rear drums of the dana 70 with some 19.5 wheels I sourced from the scrap yard. need to space out the front wheels. what spacer am I actually looking for?
obviously wont do...
Im looking to turn my single axle truck into a dually strictly for looks wise just gathering info now.
before you guys slam me for saying looks wise heres the deal
the truck is a 1939 dodge on a 1996 2500 2wd frame with original 2wd suspension. back in 39 this truck was a dually and I think...
Bought an engine for a swap and pulled the cover to see if the dowel pin had been fixed found it at the bottom of the case. It got chewed up but no damage i can see to any of the gears. It did do a little damage to the case itself but no external damage. And no oil leak. Well now its out and...
have a 96 12v 5speed in a 39 dodge looking to buy some gauges for it does anyone know what amount of oohms I will need. stock tank pump and wiring. 0-90? 0- 30? 240-33?
I have a 12v in my 39 dodge pickup and need to sort out an intercooler. looking to find one with inlets on the same side so I can run it vertical in the narrow hood. all my google searches have come up with cheapo ebay units. any advice on where to start looking? max width is 18 inches max...
picked up this motor for my 1939 dodge pickup its in the truck and fired it up and have a pretty decent leak coming from the drivers side of the motor just above the ps pump. 96 12v with unk miles
any ideas where this is coming from?
I have a 39 dodge that i have swapped a 12v into currently running the 96dodge vaccume brake booster swapping to hydro should let me lower the body since boster almost hits pump as is. Im looking for info or a write up on what i need.
Ive heard parts from a 97 dodge bolt in. What about a 98? I...
Ive been working on this project for the past six months.
found a 1939 dodge 1.5 ton cab pieced it together with some 41 front fenders a 39 nose and unknown year hood.
next came the donor truck bought a 96 2wd longbed single cab 5speed 12v cummins. I quickly parted out the truck and started the...
has anyone ever used an old pressure gauge as a boost gauge? I think that would be the perfect fit for my 1939 dodge especially since it used to be an old fire truck.