Search results

My cousin has a 98 4wd 12v with NV4500. We replaced the pilot bearing, throw out bearing, and flywheel about two years ago. He said 5th gear now makes a terrible sound. He addressed this issue years ago but sounds like it’s back. Last time I removed this trans, I had to spread the frame rails...

My 91 has recently eaten two voltage regulators. What I believe was the OEM regulator lasted up until two months ago, Made in USA was printed on the body. Two china regulators later I was advised to switch to a GM style one wire alternator by PA Performance. Symptom is the voltage creeps up to...

Selling my new AFE stainless exhaust manifold. 03-07 style manifold, will fit a 24v engine. Plans changed and I no longer need it. AFE PN: 46-40011 $400 plus shipping.

From my 2005 stock 48re trans with 120k on them. Good condition, nothing wrong. Someone needs these for $75 shipped to lower 48 states. Price is low enough, don’t haggle. Going to scrap otherwise.

I ordered a 30’x40’ metal building a month or so ago. Received the call yesterday that it’s being released to the shop for fabrication. Going to have 15’ eves, a 16’x12’ door to the north, 12’x12’ to the south, and 8’x10’ to the east with a 3070 walk through on the north also. Need some help...

Found these when cleaning out my tool box this past weekend from my machine shop days. They came with a group of tools I purchased, never used them but thought they were neat. I’m sure they are for measuring spindle speed, just wondering if someone can shed some light on their exact use...

Anyone use these KFD (killer force drills) bits from Drill America? Looking to try something new and was told to check these out. Prices seem very reasonable after some shopping around. They have a nice 1/16” - 1/2” set with shatter proof case. Just need something to throw into my cordless...

I’m helping my cousin rebuild a little 2 cylinder Sanborn air compressor. He has no compressed air currently, which sucks. We found thisncompressor tossed in a burn pit filled with water on a ranch. Hauled it home and tore the motor and compressor down. All looked fine once he baked and dried...

I’m tired of always having to be mindful of where I park or carry a sheet of OSB to slide under the trans of my 12v because of the oil leak. I’m 99% sure it’s the bearing retainer housing on the front of the trans. The oil that leaks is gold in color as the engine oil is darker in color. (Same...

What type of oil should I be putting in this NV4500 I had worked on? Dodge recommends their own blend that is a dealer purchase. The guy who worked on the trans for me said Castrol 30 weight synthetic. What should I run? It’s a stock power daily driver 98 12v 4wd.

Working on a 98 12v 5spd 4wd truck that broke the input shaft. Owner bought the truck with a SouthBend single disk clutch already installed around 90k miles, truck now has 220k miles. All highway driving mind you. I know the flywheel is warped just by running my hand over the clutch mating...

Selling everything cheap for members on here. I’ll sell most stuff for a case of Coors light. More expensive items, maybe a bottle of Woodford. These are left over parts from my 3rd gen can swap. Will start to post pictures as I dig out more stored junk. All parts are located in Houston, TX.

What is everyone using for an electric brake controller? I have a Tekonsha brand in two trucks that are different models and neither of them brake how I would like. It’s mostly with the gain adjustments that are annoying. No matter my adjustments, it’s applying about 30% brake when I’m at low...

Throwing it out there to see if anyone is making a trip soon from Fort Smith, AR area to the greater Houston, TX area soon. Need a drill press hauled. Roughly 500lbs. 23"x28"x72" Tarped load would be preferred. PM me to discuss details and a rate.

I am looking for a good quality SAE tap and die set for general shop use of chasing and cleaning threads. My old man has a really good one we always use, but the manufacture is no longer around. UNC and UNF SAE set. Something from 1/8" - 3/4" What do you have?

I picked up a 5hp 60 gallon single stage compressor, but it didn't come with the starter box. Previous owner was starting it through the pressure switch, which I'm not a fan of. I purchased a starter box and now I'm unsure on how/where to exactly hook up wires. Box is mounted, two 110 legs and...

I have a good pile of parts left over from a 1/2 ton gas 3rd gen that won't be used. Truck was used as a donor truck for my cab swap. Run down of what I have: Complete rolling chassis of a 03 quad cab short bed 1/2 ton. 4.7 v8 engine with 215k. Has a couple burnt valves but cranked and ran...

Someone installed the sprag backwards when building their transmission and made some noise when 4th gear hit. There is most likely nothing wrong with this shaft, I just wanted piece of mind so I replaced with a new shaft. It's been sitting on the bench for a year so it has some paint...

I changed the oil and fuel filter in my 91 12v a few weeks back. This maintenance is performed every 6 months due to speedometer not working and miles don't register. Noticed the top of my old fuel filter looked rusty. Cut the filter in half and there seems to be a fair amount of rust inside...

Where is the best place to buy a cowl hood? Looking for my 05 CR. LMC seems to always have inflated prices on body parts compared to other internet searches. Are all these hoods stamped at one factory then purchased by dealers, so fitment is going to be a gamble either way?