Search results

I must be computer illiterate... Because i cant figure this dang thing out. I watched the youtube video on their site and every time it gets below 7 mins on the usb update it faults out. Any help. Trying to get this truck outta the garage so i can get back to my 12v.

I have a non ic ve block, everthing is in the block but the cam, started to tear it down but got distracted on other stuff. Asking 400 for block and stock cam. Needs honed at the very least. to get the cross hatch put in. Have new p-pump timing case that can go with motor for an extra 200...

This will be my first year pulling an auto. Trucks a 95/3.54 with built trans. 5x16s and a maxed out 215 with full cuts, head as a bit of work done, schied street cam. and hx55/52 hybrid charger. When do i lock up? My charger is a bit big on the hot side so im gonna get under it at the end of...

What has to be machined to run these. Im fixing to take a head to the shop to be hot tanked, decked and a valve job done. my gasket kit came with the barrel type valve seals and i want to run the top hat style.

Im looking at a 12v that has a small crack under the freeze plugs passanger side. I have a motor that i can swap, but i figured id give welding it up a shot first. Anyone have any tips or tricks for me to try? I plan on laying some JB weld down after i mig it up.

Like the title says any one know the size of the bolts, i need to get an engine on the stand and cant remember what size they are. I was thinking 12x1.50

Just wanted to let everyone know what awesome service they have. Ordered one of their 60 ofv, pump gear puller, and valve spring compressor, friday night round 830 and it was all here a noon today. Even got a back of peanuts and sunflower seeds lol. hopefully the rest of my parts wll be here...

Ive messed with its for ever now. It all started after my pac brake 4kgs. at 3k with not boost its starts to chug pop miss and blow blue smoke every where and even if i stay in it i cant get over 3600-3800. At first i thought it was timing. I set at 19.5. Ive put a raptor pump on, messed with my...

Im cleaning the garage out and have came across a few things that can be sent down the road. Set of used 6.7 rods and pistons unsure on miles, pistons need cleaned up but aren’t melted or cracked. 100 obo for the set Isspro pryo gauge in single pillar pod for 12v needs probe but has the wiring...

I just picked up a used schied street cam. Looks to be a 12v regrind. It has a bit of rust staining on a few places figured id just take some scotch brite pads and wd40 and clean it up. Or is there a better way? Also on tappets i was just going to get some new 12v tappets or should i pick up...

For some reason my linkage keeps binding up on my pump. I replaced the tie rod piece twice since ive owned the truck. seems after a couple months anything over 3/4 throttle throws it off the pump. Ive watched it in action and it looks like the pedal has more travel than the pump. is there a way...

I have a 95 with a decent built auto and a 96 with a 5sp with a crap dual disk. Im wanting to turn one of them into a play to. The 96 needs a motor rebuild. Im leaning towards the auto as a sled/drag truck. What would you do pull the motor on the 96 build it up and put it in the 95 or build the...

Is there a difference between a oring gasket and a stock headgasket?

Whats your opinions on using used pistons in a budget motor build? I have a set of barely used 6.7 pistons that I was going to clean up flycut and coat to use in my puller. Id rather t last but I really dont want to wrap a ton of money up im a motor to be sidelined with a broke axel or burned...

My radiator has mineral deposits bad. It gets up to 190 fairly quickly on super hot days I had to watch it because it would creep up to 200. There's no thermosat I'm pretty sure some where along the line it got washered. Would it hurt anything to run clr to clean Out the motor and radiator?

Billet tappet cover arrived and looks awesome, and fits even better. Thanks Chas

I did the bic pen mod, and this may seem dumb but would this cause my fuel system to be harder to bleed the air out? I put a new mech lp( which was chinese but free) on my truck while my Injection pump was out and deleted the preheater. And for the life of me i couldnt get the air out of the...

I really just noticed this since its gotten cool on the morning drive to work and ive had the windows up. when i shift in to od my turbo shutters a bit. Even if im in the throttle the od shift pulls me down to or past 1500 rpm, and my trubo doesnt lite till 1750. Anyway to keep from pulling down...

Ive got to put a billet tappet cover on my truck this weekend work is getting p/oed bout the oil spots on their parking lot. Im pretty sure i have all the tools i need but my garage is full and have to do it either at my uncles or brothers house. Neither have many tools at their disposial. I...

Need to hopefully pick one up before the weekend. Shoot me a price. thanks chas