Search results

Used for two seasons, comes with front cover, fuel pump, and the power steering pump with the pump drive welded on. I would like to get a stock 94-98 ps pump in return. The injection pump cover has a stock oil filler epoxied to it. This setup functions perfectly, just changing my setup a...

Full set of 14mm Head studs for a 12v. Torqued 2 times. Been sitting in the shop for a year or two. $500 plus the ride. call or text 3o9 two 7 five four 24 eight. Thanks.

Hamilton 12v Head, comes with valves(int 1.85/exh 1.75), heavy duty springs, retainers, and locks. The intake trough has been cut off(ruff cut), and Zack ported one intake runner and one exhaust side for me to copy. Zack also cut the valve pockets just past the valve seats for improved flow...

Very good condition Hypermax Tapercore intercooler with 4" tubes, made to fit superduty trucks up to 03 I believe. $750 plus shipping, would rather not ship due to size. Located in Bloomington, IL. 3o9 two 75 four 248.

I have a 6 cylinder Mitsubishi diesel mated to an AT545 out of a 96 box truck. Has an inline pump and all accessories minus a starter. Ran fine when parked, rolls over just fine with good compression. 88,000 miles. Not sure what its worth open to offers, $1500? Call or text 3o9 27five, 424eight.

E99 F350 7.3L Powerstroke Ext cab, DRW, 6 speed, 4x4 manual shift on the floor. 298,000 miles, has just been totally gone through front to back with lots of new parts. New brakes all around, all new caliper brackets, new front rotors and calipers, wheel bearings, rebuilt rear end, new wheel...

Just curious to what you guys think about the Hamilton head in the 2.6 class...basically will it be legal or illegal, this year, next year...What about in the 3.0 classes? Not really interested in a battle of if the head is good or not just legality of it in 2.6 and 3.0 classes. Thanks.

Is anyone planning on going to the last event of the year?

There is a pull in Edinburg, IL this Friday. Starts at 6:30p 3 Gas Classes 1 Diesel Class (100% payback) Rules are pretty open, one ton drivetrain.....and about anything else, no drugs....

Ok, so I have decided to take a year or two off and let all the class rules play themselves out, I am offering up for sale my puller engine as a complete package or will sell the pump and injectors separate and keep the long block for another project. All parts listed have about 25 hooks total...

Triple disk comp pulling clutch, one year old, approx 25 passes. Requires modified release bearing arm and heavy duty hydraulics. 1 3/8 input. Weighted to come on about 4800 rpm. Excellent condition $2000 Contact me at 30nine 27five 424eight

Putting these up for sale..... Harts P7100 13mm, AG gov, self contained oil, has Kennys drive gear installed at harts. Over $4600 new....asking $4200 Harts dual feed 5x.025 12v injectors, $1700 new....asking $1400 These have approx. 25 pulls and are one year old, oil changed in pump midway...

Well my dually isn't selling so I am going to try another route. I would like to sell the front and rear bumper and the dually bed to put a flat bed on. The bumpers are ranch hand style but I don't think the front one is. The rear one maybe but again, not for sure. The front bumper is in...

I am re-posting this pump that I have previously listed. Its a Scheid pump that was built back in 07, and has recently been back to them to be gone through. It is auto gov, will do 5000 rpm, and 825cc. It has no runs down the track, so it is basically new. Asking $2800 with no core required...

I was going to use this for a back up engine for my puller but I have decided to change directions. I bought this from Wes Wade back in July. 12v Block, stock bore, freshly honed CR pistons, not sure what year, but I think the 03-04 model Heavy Duty rod bolts Mild cam, not sure on specs...

I have a intercooler from Joe that has the big core that he uses in the 3rd gen Dodges but made to fit in the Ford Superduty. It requires customizing the radiator support to get it to fit. It has 3.5" in/out and is in good working condition. It does have a small dent in the top from when I...

Scheid Lightning 20000 P7100 13mm pump, 5k springs, auto gov, will do 825cc set at 600. Fresh from Scheid, comes with scheid external fuel pressure regulator. $3200 no core. ARP 625 12mm headstuds, 1 torque sequence, $700 Haisley Big/Intermediate cam, like new, has bolt on cam gear, reground...

Scheid Lightning 20000 P7100 13mm pump, 5k springs, auto gov, will do 825cc set at 600. Fresh from Scheid, comes with scheid external fuel pressure regulator. $3200 no core. Scheid Lightning pulling turbo, 3.0 wheel with, 2.8 bushing, t3 231 hx40 outlet on turbine housing, great condition...

Here are some vids from Henry this past weekend. Sorry, not all the truck were recorded, but most of them. Stock http://www.youtube.com/watch?v=d8TJFEhq6Eo Altered http://www.youtube.com/watch?v=LYRJpyBkTDM Open http://www.youtube.com/watch?v=2LEG-nHhKHs

Used maybe 10 hooks, looks brand new, has bolt on retainer. $650 + shipping