Search results

Ran one good time down the track at the test and tune in Warsaw and found today that the head is broke off and cracked where the exhaust manifold bolts to the head. #1 and #2 top of exhaust port is broke off, #3 and #4 are cracked, #5 and #6 I can see nothing wrong with. Same turbo and manifold...

Where are you guys getting your rebuild kits at for an 8.3 in a Tandem? Got to be cheaper than the Cummins Distributor here in town.

Getting ready to tear apart my parts truck I bought a while back, tried selling the whole truck on here, then started driving it everyday, now I need to get the parts out of it that I bought it for. Ok so I am KEEPING the following and these parts are not For Sale: Engine (INC. pump, turbo...

Got a friend that has an 05 with some trouble codes... P0272 INJ Cylinder#4 Contribution/Balance power cylinder, valve train, or injector P0611 FICM Fuel Injector Control Module FICM Error P0674 GPCM Cylinder#4 Glow plug open to ground, short, voltage to glowplug He is reading these off of a...

Modified P-PUMP 838 pump, 180hp from a 96 manual, roughly 180,000 miles, Lazer Cut DV’s, Mack rack plug, 5k rpm spings, all Mods from Haisley Machine. Gutted AFC and no plate. Truck ran awesome with the mods that were done, videos on youtube.com, User: Midstatediesel. I have more videos if...

What exactly is a flywheel shield that meets the SFI spec 6.3? Can I buy one or make one?

Got an 04 6.0 with 75,000 miles on it. The ends of the stabalizer bar have popped out, like the rubber is not holding it in there, is there a recall on this or do I need to buy new ends or whats the deal? Also, i did brakes on it today and while test driving it after doing the brakes I noticed...

Is anyone run a air to air and then a air to water, so the ata would be first inline after the turbo and then the atw would cool before going into the engine, would this be benificial? I have an air to air cooler that I stole off an RV pusher that I was thinking about running in parallel with...

I have a good HX35 for sale. Came off a 96. Good condition, no shaft endplay, slight play up and down like it should, $200 plus shipping.

How would would a GT42 with a 80mm turbine wheel, 1.53 ex. hs, 76mm comp. wheel, and a 2.8" inlet work? Manual trans, pulling only truck...

got a spare big input shaft for a nv4500, 1-3/8", billet steel, comes with the larger colar for the front bearing, new in box. First $300 takes it. call (309) 275-4248

I added this to another thread but I want to repost, I have a 95 running engine that is complete minus the turbo. It came from junk yard so mileage is unknown but it ran great when I had it in the Superduty for about 6 months during the build of my pulling motor. It comes with or I can...

I bought this truck for parts but now I need to sell it or part it out. I would also trade for cash and something else to drive. 1996 3500, ext cab, 4x4, 5spd, hunter green, rust free but has some dents. It runs great, but needs a radiator, has a cracked windshield, seat is a little rough on...

I'm selling my 2000 Jetta 5 spd, its Black, runs really well, drives very nice and smooth, has 264,000. It does have a cracked windshield and the headlights only work on high beam, but the high beams are not that powerful so I've just been driving it that way. I lost my job that I had this car...

I have one severe duty air filter set up for a super duty in good shape with a good clean air filter. This was installed on the truck when i bought it, and I took it off when doing the cummins swap. Seems to be a much better design than the stock leaking box. I'll take 100 bucks plus shipping...

I need to clean up the shop and have a bunch of spare parts ALL ITEMS are in good serviceable condition and have been taken off stock engines and been inside a garage... 2- hx 35s ...$200 obo each 2- stock manifolds ...$30 each 2- starters ...$40 each 2- alternators ...$50 each 1- set or...

I still have the "Destroked" adapter plate to bolt a 12v to a 4r100 and the flex plate. 6 liter starter too that you use for the cummins swap. 700 for the adapter 550 for the flexplate 150 for the starter interested please call 309 275 4248

I got a 2004 drw dana 80 thats in great shape, disk brakes, pads are in great shape, it has traction bar mounts welded on it that could be cut off but would have to be. The spider side gears are welded to the carrier so its full time lock and it has been tested pretty hard with the cummins up...

http://www.youtube.com/user/midstatediesel Made a decent pass with the truck today in West Burlington, IA. Still took a day and half to lite the turbo, but when it did lite it ran alright. Needs a little more air I think...