Search results

  1. jpowel29

    ATS 5000 T3 Exhaust Housing

    T3 Exhaust Housing (.85 A/R) Fits ATS 5000 turbine (83/77 I believe) Nice Shape $125
  2. jpowel29

    Raceline wheels and Hoosier DR2 Drag Radials

    Set of 4 Raceline Shift - 16 x 8 - black 8 lug wheels with center caps and chrome lugs and Hoosier DOT Drag Radials - DR2 series - 295/50/16 Only two races on this set-up. All in perfect condition $1200 plus shipping - everything is banded/shrinked wrapped on a pallet ready to quote and ship...
  3. jpowel29

    Precision 65mm compressor wheel

    PTE compressor wheel (65mm x 108mm) - cut down from 80mm inducer 2618 forged alloy Threaded through bore (approximately 8mm) Never ran $300
  4. jpowel29

    Prothane Body/Cab Mounts

    Red Prothane Body/Cab Mounting Bushing Set - used in very nice condition PN 7-141 - fits 99 thru 2014 Silverado/Sierra 2500 4wd and 2wd - all cab configurations May also fit others as well - check Prothane website/catalog to verify correct PN for your application No mounting bolts included $70...
  5. jpowel29

    Cummins 12v connecting rod set

    Complete set of 12v connecting rods Have been cleaned, checked for size, and cryo treated Brazil castings - great shape $250
  6. jpowel29

    LB7 Cam Gear

    Good Used Cam Gear - fits 2001-2004 LB7 and these make a nice replacement for the two piece cam gears used in LBZ. $50
  7. jpowel29

    12mm P Pump Core

    12mm P Pump Core 0 403 736 867 - looks to be 275HP pump off 8.3L RQV400 gov Missing a few pieces - shown in pics $200
  8. jpowel29

    5.7 Diesel block

    Looking for a 5.7 GM/Olds diesel block (1979 - 1985) D or DX blocks Prefer .842 lifter bore but the .921 lifter bore blocks will work as well No heavy rust or pitting I will pay for freight and can do Paypal
  9. jpowel29

    Garrett GT4202 75mm T4

    Garrett GT4202 Journal Bearing Turbo - fresh rebuild (zero miles on it since) Compressor Specs: 74.3mm inducer (cast Garrett wheel) 102mm exducer (53 trim) 5" compressor 3" vband oulet Based on Garrett's map it flows around 95lbs/min Turbine Specs: 82mm Garrett turbine (84 trim) 4" vband...
  10. jpowel29

    BD Billet Flexplate

    BD Billet Flexplate PN 1041210 - still like new with very little run time $300
  11. jpowel29

    Mickey Thompson Classic Wheels (Black) and 265/70/17 All Terrains

    Set of 4 wheels and tires currently on my 2006 CCSB DMax Mickey Thompson Classic Wheels: 17 x 9 - 8 x 6.5" - 5" backspacing with 3250lb load capacity per wheel. Black Mickey Thompson center caps and chrome lugs included. Wheels are in great shape (stored inside during the summer/racing months)...
  12. jpowel29

    Dodge Second Gen Borgeson Steering, Hydroboost, and Suspension

    Parting out a selection of like new aftermarket/replacement parts. All were bought new and have less than 1000 street miles of use. Borgeson/Delphi Dodge Heavy Duty Steering Box - Bought New (not a reman gearbox or internals). Has new MasterPro high pressure hose and new pitman arm installed...
  13. jpowel29

    Truxus STS 33x13.5x16

    Set of four Truxus STS bias ply tires - 33x13.5x16 Excellent shape - tread depth still shows near full depth 19/32 Only 2-3 test hooks on this set and zero street miles (stored inside out of the sun) One sidewall has surface nicks (shown in pics) but did not penetrate in $800 for the set
  14. jpowel29

    Aeromotive A2000 Boost Referenced Fuel Pressure Regulator

    Aeromotive 2 port Fuel Pressure Regulator - PN 13212 Excellent Condition - Very little use $150 shipped Features: Adjustable from 2-20 PSI. Bypass design provides the ultimate, dynamic fuel delivery system. (Requires AN-10 return line) Fuel pressure rises on a 1:1 ratio when referencing boost...
  15. jpowel29

    12V Runner Intake

    Good used 12v Runner Intake - I believe this one was made by a CompD member (Big Yellow Iron IIRC) Good used condition - $400 plus shipping
  16. jpowel29

    Factory replacement intercooler - 1994-2002 Dodge

    Aftermarket factory type replacement intercooler (Valeo brand) for second gen Excellent condition - no leaks $300
  17. jpowel29

    Heavy Duty BTR Radiator - 1994-2002 Dodge Ram

    4 Row, all metal radiator (tank and core are brass/copper) bought new from BTR (Built Tough Radiator) Excellent condition - used for about 6 months before I tore the truck down to make it a track only toy No internal oil/trans cooler Has factory shroud, overflow tank, and washer fluid tank...
  18. jpowel29

    Centerline ConvoPro 16x16 racing wheels and Goodyear Slicks

    16x16 Centerline Convo Pro Drag Racing Wheels Non Bead Lock (5 x 5 bolt pattern) - these are ultra lightweight and strong drag wheels. Used but in great condition. Just re-polished. New Goodyear D1230 slicks mounted on the Convo Pro wheels. 36x17x16 slicks. Zero miles or passes on them...
  19. jpowel29

    GM/Cummins Trans Adapter and Flexplate

    Looking for GM trans adapter for 12v Cummins and flexplate. Also looking for a good TH400 or TH475 transmission core (2wd).
  20. jpowel29

    LLY/LBZ/LMM/Drag Race Parts

    2ea - Industrial Injection 125% over LBZ CP3s. Both pumps bought new from Industrial - still on my truck. Excellent condition - very low miles and no street use. $1500 each PPE Twin CP3 kit for LLY/LBZ - $1000 (no pump included) Two sets of Exergy Injectors. Prior to purchase both sets will...