Search results

I'm having the usual dead pedal issue at cruising speed in 4th or 5th gear during steady throttle situations. The kicker is I attributed it to a dying injection pump and replaced it, but the truck still does it. I've done the key on/off trick to read the pcm and have hooked up my scanner but...

Looking to swap an older tst powermaxx with the remote for a smarty S-03 since I'm replacing injection pumps and do not want to void the warranty. This thing is not perfect, who ever owned it before me really put a hurting on the remote & the harness and it left it kind of hinky, but it will...

First off let me give you some back ground on the truck, it's an 01 QCSB 4x4 134,000 ish miles, has some injectors, tst comp, he351, supporting mods, southbend street dual disk, southbend hydros, etc.... Ever since we had the trans built by a company here local its never really shifted right...

The truck is a 2001 dark blue QCSB 4x4 5 speed with 132,000 ish miles (is my daily driver so mileage will change) it's been in the family since new but I'm looking to trade for something newer. Engine/drivetrain Mods: Air dog 150 Isspro egt/boost/fuel pressure gauges Southbend street 3250 d/d...

Just finished rebuilding an he 351 and noticed the holset kit didn't come with a new gasket for the drain. Anyone use that custom cut gasket material or just silicone instead of the correct gasket? /i\

Picked up a 90 2wd dodge 5 speed over the weekend as a donor for dad's 48 chevy 2 ton After driving it around a little today we're already looking for some more power before it gets put in the chevy Plan was for a Denny T stage 1 pin, a 3200 gsk, and the old hx35 off of my 01... We're...

Looking for a lower mileage 12 valve with a 5 speed 2wd trans... Dad is looking for something to put in his newly acquired 48 chevy 4100 loadmaster Doesn't really matter if its a VE or P pump motor as long as its complete and runs with no issues... Have cash in hand and willing to travel a few...

I have a used EM USA hx 40, ran for 5000 miles as a stock replacement on friends truck and worked great, has normal shaft play with no in/out movement... Needs a waiste gate pod and boost reference bolt to make operational. Asking 200 for it feel free to txt or call me if your interested...

Have a he351cw that I picked up from a member on here. I planned on throwing a rebuild kit at it and wondered if I should have the assembly balanced afterwords? If so, anyone know a ball park estimate on what that costs and a decent shop that could get it done Thanks in advance Scott /i\

looking for a used he351cw to do a swap on my 2nd gen... have cash if local or paypal if it needs to be shipped... thanks in advance Scott

Any reason to shell out the extra cash for the gated housing or would I be fine without the w/g pushing the fuel I have now? Anyone ran one of these turbos? Experiences welcome... Turbo specs 62/68/.83 t4 housing Would be using a t3/t4 adapter unless I could find a decent used manifold...

to start this off ill give yall a little back ground info on the truck its a 2001 5 speed with 124,000 miles has the usual mods dual disk airdog 150 new injection pump as of 25,000 ago afe intake 5 inch exhaust the truck has had a no start issue in the past but sort of comes and goes...

Selling just the flywheel seeing how the disk is pretty much junk (will include pressure plate and disk if someone wants it) it is a 13 inch conversion flywheel with the 1.25 input size also selling stock shift fork $25 asking $180 obo open to trades for any kind of performance goodies...

edge juice with attitude i took in for trade on some other parts but am now looking to sell out right.. Its supposed to go on a 02' but is hooked up on mine just to see that it works and it does so flawlessly... it has the correct map sensor for an 02 but would need an adapter to connect to a...

alright guys i picked up a set of lines for my 01 to find out that the injection pump i have now isnt close to being able to keep up so they need to go.. they have been installed only once and have maybe 15 minutes of run time located in Spring, Tx 77379 p.m's are the easiest way to get ahold...

Quadzilla ADR w/pulse v2 just over a year old Pulled from truck b/c it would surge guess it didn't like the new pump. Come with everything including the original box and instructions Asking 500 shipped

just like the title reads...I'm installing a boost elbow this weekend and would like to know which to trust isspro boost gauge will read 20 ish psi under WOT and the quad will usually read about 28 to 30... i know the gauge reads correct been tested with shop air and im pretty sure it doesnt...

Alright guys ive got a used phat shaft 62/70 that i picked up just because it was a good deal. I wanted to adapt it to my dodge but after alot of research figured it would be to much work and i just want to sell it and get something for my application. Im not a ford guy by any means but looked...

Alright guys i picked up a phatshaft 62/70/12 two days ago SUPER cheap. the guy was hurtin for money and i happened to be at the right place at the right time for once. Any how i got it home and it looks pretty clean. My question is are there any rebuild kits for these things like new...

goin a different direction with this truck and want to get rid of the quad 6 months old no issues includes entire harness and egt probe never cut or spliced, has 3000 series tune loaded into and runs like a champ lookin to get 500 for it open to possible trades for injectors or other...