Search results

fresh and ready to go new billet wheel $1000 shipped in the US The website will not allow me to upload pictures? Shoot me a text at 317-448-3787 if your interested. Several other chargers available.

anybody got an old crusty housing laying around they wanna sell?

85/96/1.32 Coated turbine housing V1 race cover V-band outlet $1200

Used turbo has a few flaws but is ready to abuse. New compressor wheel Zero miles since balance Bearing housing is back cut for a larger compressor wheel Turbine housing has a few internal cracks Really want it off of the work bench $550 and a free ride anywhere east of the continental divide.

really in need of a good usable s300 bearing housing. pocket can be cut for whatever. will buy a core turbo to a bare housing. please let me know if you have something laying around.

Super happy with the 62/71/13 over a 75/96/1.15. 95 12v, quick rate 12mm pump, 5x16 injectors. However, like all of us i get a little bored. I make right at 70psi and have tuned and tuned. I can move the boost around from turbo to turbo but max i only get 25psi from the primary and right at...

Selling for a family member. 317-989-9553 This converter is a stock stall for a 47-48 with approximatly 30,000 miles on it. I have personally never seen it work but have no reason to believe it isnt in 100% functional condition as i know the people it came from. The owner went a different...

Does anyone have one laying around? Ide like to find an affordable/buildable core.

does anyone have a used bearing housing and or a .91 or 1.00 housing for an s300 hiding somewhere in your spare parts sections? I don't care what the pocket is cut for. could also use a heat shield for the turbine side. thanks

OEM in ver good condition. Has one small crack in the scroll where they all crack. Very minor. Wastegate area is perfect. Alignment pin holes are clean and clear. $75 shipped anywhere in the lower 48 Also have 3 hx35 housings 2 wh1c comp covers and backing plates 1 hx35 bearing housing 1 wh1c...

I'm looking for a cheap truck to do some install and testing on. worn out tires are fine. street legal with a title a must. does not have to be road worthy rust is acceptable and expected interior needs to have something that looks like a seat and part of a dash mileage may be exempt. auto...

Nearly new DAP housing Very low hours. Original owner went to a 14cm 68mm turbine HE351 outlet $350 shipped anywhere in the lower 48

At what % foot movement does the afc foot get out of the way and the fuel plate takes over In a street driven compound set-up what kind of psi works well in conjunction with foot movement. Stock movement on the shaft is approximately Initial 0-2psi Half 15 Full 22

fighting yet another $%$&Q#@$&#@$ %)(*#@)(@*$(* emissions related problem again this morning. its all I ever seem to get done. I wonder how much emission related garbage cost fleet and small business owners per year across the US? I also wonder how much the businesses across the country have...

Specials :: Airdog Custom Fuse Delete Bypass Module Connector :: ADFUSEDELETE

Just seeing if there is any interest in a fresh rebuilt 63/65/?? S300. I dont currently have a turbine housing for it. Sell without a housing for $400.

does anyone know the specs on this turbo? thanks

considering the benefits of swapping cams in my 160 pump. street truck. mid 600's. looking for efficiency not max fuel. I don't need a 13mm with 850cc of fuel. 450-550 is plenty. the truck struggles with RPMS above 3300 in OD climbs but slow. 55psi fuel pressure when the second pump kicks in. 40...

So recently i decided to build a small set of compounds that might work with a near stock truck. With little to no supporting mods. I wanted them to be a direct fit. Test subject is a very well used 95 with 257,000 on the clock. Had to do a ton of work to it to get it safely back on the road...

66/74/14 Brand new cartridge Hx40 outlet 3rd gen cover Ready to go. Gate set at 40psi Asking $1200